Все сообщения

Q: Does it do full acro? Can you use tri blade props? thanks

Задавает BG121712837 на 2021-10-03 04:27:51

DonKracho Yes it can do acro mode depending on you betaflight settings. It is nuch much more agile compared to a Tini Hawk with 1S

2022-05-01 07:57:48 полезный (0)
Оплатить
ответы (5)

DonKracho The UZ80 can fly very stable and slow depending on yout transmitter and betaflight settings. But I do not recommend to use it in free nature! The UZ 80 has no alarm beeper. If you crash you may not find it even in high gras.

2022-05-01 07:53:11 полезный (1)
Оплатить
ответы (7)

Q: Is 3.7 lipo or 3.8 LiHV?

Задавает maxycma на 2022-04-30 10:33:40

DonKracho The specifications of contoller and ESC to allow 1S LiHV (4.35V). I use it with LiHV too. The voltage is slightly higer only and does not break the electronics.

2022-05-01 07:44:05 полезный (0)
Оплатить
ответы (1)

Q: Does it support Alexa?

Задавает PanosGR на 2022-03-09 10:52:07

DonKracho No

2022-03-12 12:06:54 полезный (0)
Оплатить
ответы (2)

Q: Please explain Tilt vertical: 120°. What is maximum up/down?

Задавает BG175411619 на 2020-09-15 10:16:40

DonKracho Unfortunately it can not look up. From horizontal it goes to straight down 90° and further 30° up again. In summary 120°

2021-06-09 05:39:19 полезный (0)
Оплатить
ответы (1)

Q: what is the rtsp url syntax to stream image on VLC?

Задавает BG131881332 на 2020-12-26 07:02:57

DonKracho By default use rtsp: slash slash [ip of your cam]:554 slash 11 for mainstream or 12 for substream. rtsp can be configured to require credentials.

2021-06-09 05:32:47 полезный (1)
Оплатить
ответы (2)

Q: what is the recording format, h264 or h265?

Задавает BG316133819 на 2021-03-16 04:22:52

DonKracho It can be configured for booth H.264 (baseline, mainprofile, highprofile) or H.265 (mainprofile)

2021-06-09 05:15:19 полезный (1)
Оплатить
ответы (3)

Q: Can the camera firmware be updated if necessary?

Задавает tholl на 2020-10-28 03:29:04

DonKracho As long as there are no faults, I would not recommend to update the firmware. There is firmware on www.ipcam.xin and can be updatated via the webserver integrated in the cam (http: ip of your cam). The firmware update applies a factory reset. Be aware that you will loose the WiFi connection.

2021-06-09 05:00:12 полезный (2)
Оплатить
ответы (5)

Q: this controlled with the eWelink app ?

Задавает JinXed на 2021-01-10 08:41:15

DonKracho No, The sample sketch preinstalled just switches the Relays in a sequence. The easiest way will be to flash tasmota.

2021-02-05 02:54:12 полезный (0)
Оплатить
ответы (2)
DonKracho 31/03/2020
0
рекомендации
Комментарии (0)

DonKracho Watchout for the CAM connection. It provides 10V. The Caddx EOS will shut down at 10V (gray image). Remove the red wire from the connector and put it on a 5V rail and everythng is fine. looks like Eachine has not tested this before delivery:(

jcreyes78 26/03/2019
6
Комментарии (2)