Все сообщения

Q: Hi! Are you going to renew stock?

Задавает BG342215237 на 2023-02-26 07:29:05

BG243353816 You will not get an answer from the company here, but they will most likely renew their stock some time soon.

2023-03-02 10:35:05 полезный (0)
Оплатить
ответы (1)

Q: weight?

Задавает charles.solomon на 2020-01-19 07:04:34

BG243353816 2.7 grams per antenna

2022-11-21 06:16:24 полезный (0)
Оплатить
ответы (1)

lacvo If I am not mistaken, the purple wire is for voltage reading from your FC to have it displayed on the camera video output so you can monitor the voltage of your flight battery. You need to solder that pin the terminal of your power supply

2022-10-04 01:46:12 полезный (1)
Оплатить
ответы (2)

BG243353816 This will not work with a dji mavic mini. It’s purpose is to be used with an analog fpv drone.

2022-09-24 08:04:53 полезный (0)
Оплатить
ответы (3)

blakey17 It's for the camera control so you can see the OSD and change settings from the goggles using the OSD I'm sure you can find some more specific information on YT but yes basically you don't need it to fly

2022-08-07 06:37:53 полезный (1)
Оплатить
ответы (1)

Q: what size stack does it hold

Задавает BG191941552 на 2022-07-29 01:45:25

BG243353816 30X30.I used this one and it fits perfectly: MAMBASYS F405 MK2 Betaflight Flight Controller F40 40A 3-6S DSHOT600 FPV Racing Brushless ESC 30.5x30.5mm

2022-07-29 10:48:45 полезный (0)
Оплатить
ответы (1)

Q: can I use 5.1 inch props?

Задавает Daniele Pintore на 2022-06-29 06:19:26

BG243353816 Yes it should be fine as it shows on the website: Support Max. 5.1 Inch Propeller. Hope this helps!

2022-06-29 11:30:03 полезный (1)
Оплатить
ответы (1)

life1sgood Thisis a remote control so the VTX only has to do with your goggles or screen. If you are using ELRS or CRSFR you will need to purchase the corresponding module and install and bind the corresponding receiver.

2022-06-22 03:58:50 полезный (1)
Оплатить
ответы (1)