Все сообщения

Q: analog compatible?

Задавает TRXRider31 на 2023-05-07 01:59:30

Chitarrone Yes, you can click " manual" showed on product page. It shows how to connect 5.8G VTX and Camera

2023-05-09 03:54:08 полезный (0)
Оплатить
ответы (1)

Ramalamajama It is in fact a 5” frame but it’s different than the one pictured here.

2023-01-20 04:54:23 полезный (1)
Оплатить
ответы (2)

Q: Black box??? 8k & 8k or 8k & 4k??

Задавает TRXRider31 на 2018-07-05 05:48:57

Gilberto There is no SD card insert at this FC (you can buy one and connect it separately spending an UART if you want). And yes, this board can hold 8K/8K as the gyro holds until 8K.

2018-07-08 11:25:00 полезный (0)
Оплатить
ответы (1)

TRXRider31 Thank you for the detailed instructions you posted. I can manage fairly well with larger electrical items in homes and on autos and such, but I am lost with items like this. I did manage to build and fly a few FPV drones on my own, aided by Google of course. Google didn't help me with this as much as you did.Thanks again!!

ConceRodz 11/08/2020
Nice and simple. Working as described. Here is the connection information if you need it. =>Automatic Irrigation Pump<= Connect + (sensor board) to soil probe. Connect - (sensor board) to soil probe. Connect VCC (sensor board) to battery positive. Connect GND (sensor board) to battery negative. Connect D0 (sensor board) to B-1A (motor controller board). Connect VCC (motor controller board) to battery positive. Connect GND (motor controller board) to battery negative. Connect B-2A (motor controller board) to battery negative. Connect pump - (motor controller board) to Motor B terminal #1 (board with screw on terminals on the right side). Connect pump + (motor controller board) to Motor B terminal #2 (board with screw on terminals on the right side). =>Testing<= 1. Place pump in water (pump cannot run dry). Connect the red wire of the pump to battery positive Connect the black wire of the pump to battery negative 2. Test the motor controller board: Connect VCC (motor controller board) to battery positive. Connect GND (motor controller board) to battery negative. Connect B-2A (motor controller board) to battery negative. Place pump in water (pump cannot run dry). Connect pump - (motor controller board) to Motor B terminal #1 (board with screw on terminals on the right side). Connect pump + (motor controller board) to Motor B terminal #2 (board with screw on terminals on the right side). B-1A on motor controller board activates pump when connected to battery negative. 3. Test the soil moisture sensor module: Connect + (sensor board) to soil probe. Connect - (sensor board) to soil probe. Connect VCC (sensor board) to battery positive. Connect GND (sensor board) to battery negative. The red power lamp is always on. The green/blue led will blink once. Dip the probe directly into water (covering only the probe metal tip) the green/blue light will on.
4
Комментарии (1)

Q: IS IT FIRE PROOF

Задавает dot на 2019-08-14 08:34:33

TRXRider31 No it is not.

2020-03-19 06:18:35 полезный (0)
Оплатить
ответы (1)

Q: Will k130 fit?

Задавает TRXRider31 на 2020-01-21 02:50:02

Carbylam small for k130

2020-01-22 12:58:37 полезный (0)
Оплатить
ответы (1)

Q: do these come with a hand maiden to froth your oyster?

Задавает Knjlexus на 2019-03-13 09:41:30

TRXRider31 But of course they do sir.

2019-12-25 02:02:58 полезный (0)
Оплатить
ответы (1)

Q: is this price for a set of 4 motors?

Задавает vpaulsmith3 на 2019-01-21 08:58:05

TRXRider31 Surely a mistake. No way this is more than others.

2019-01-21 09:55:20 полезный (0)
Оплатить
ответы (6)