Все сообщения

Q: is this hd for use with the dji googles?

Задавает borsve на 2021-10-15 12:30:43

nnsense Nope, you have to look for drones using something like "CaddxFPV Vista"

2021-10-20 05:47:00 полезный (1)
Оплатить
ответы (4)

Q: will it work with the radiomaster tx16s

Задавает Dan187 на 2021-06-04 04:24:20

nnsense The MAMBA MSR D16 is FrSky D16 compatible, so it WILL work FrSky receivers and any multi-protocol radio out there including the RadioMaster tx16s.

2021-08-08 06:23:32 полезный (3)
Оплатить
ответы (3)

Q: can i binde it with the radiomaster tx16s?

Задавает BG750384514 на 2021-07-26 12:00:22

nnsense The MAMBA MSR D16 is FrSky D16 compatible, so it WILL work FrSky receivers and any multi-protocol radio out there including the RadioMaster tx16s.

2021-08-08 06:22:53 полезный (0)
Оплатить
ответы (1)

Q: ok but what good is a 50mw vtx?... won't get much range with that at all?

Задавает sloppy191 на 2021-07-14 05:17:10

nnsense It's not an "inopportune comment", range also means "penetration", with 50mw you're unlikely to get signal behind a building 25 meters from you. And they are selling it with crossfire option.. so you could "easily go from 500 m to 1 km" but you cannot because of the ridiculous VTX.

2021-07-31 04:24:11 полезный (2)
Оплатить
ответы (3)

Q: what’s the difference between type a and type b

Задавает ImranoXI на 2021-01-21 06:25:59

nnsense Buy the type B, that is the one showing degrees as a number. Type A is the one with the 3 dots. For 1$, it worth.

2021-01-23 08:00:53 полезный (1)
Оплатить
ответы (4)

nnsense Hi, date cannot be changed, unfortunately (yes, it is a pain.. I know..) and anyway there's no battery inside the goggles so you should update it every time you turn them on. About the update, once you've turned them on (powering on while holding the left rotary switch down) you need to put BOTH "EV300O_A_APP_V1.2.9.bin" and "EV300O_B_APP_V0.0.3.bin" files into that folder. Leave the copy finish and WAIT like 5 or ten minutes more. There's no progress shown, so you cannot really know when the update is finished internally, that's why is better to leave them alone 5 or 10 minutes more. These are the goggles files, once done unplug the goggles, turn them on, you should have the new firmware. Do the same with the module (connect it to your computer holding the button) and copy the third file from the update package. Leave this alone some minute more too. That's all.

2021-01-13 03:45:20 полезный (2)
Оплатить
ответы (3)

Q: Good evening, does it measure temperature and capacitance?

Задавает Francisco на 2018-11-08 08:04:53

nnsense To elaborate a bit the "No, Yes" answer: It doesn't measure temperature, it does measure capacitance.

2021-01-08 05:04:34 полезный (1)
Оплатить
ответы (4)

Q: Can I plug this into my PDB instead of the battery?

Задавает adamconnolly711 на 2020-10-03 12:54:25

nnsense As the other answer rightly said, this is a power supply, you plug this into a charger. If your charger has the function, you can start it in "power supply" mode and set, say, 1.8A - 14.4V, and use it to power your drone using a female-female cable. As this is rated "5A - 20V" you would more than likely burn your board.

2021-01-02 06:46:48 полезный (0)
Оплатить
ответы (5)