EricF Use MissionPlanner or QgroundControl from the Ardupilot project. It works with NAVI as it fully supports the mavlink protocol.

EricF Yes, it has ailerons, and V tail, so 4 servos are required.

EricF Have you flashed the proper firmware to the SN L flight controller? it requires a special version to work with the AAT

EricF Position data is sent over the video signal, integrated into the OSD info in some fashion I think. According to info in the manual. It only works with the SN L Owl FC to my knowledge. But it does say it supports Mavlink, so it should work with others. But you are on your own getting it to work with those other than reading their manual.

EricF You need the SN L Owl Flight Controller on the airplane

EricF It does not have a receiver, so it technically supports any frequency. However it is designed for 5.8 antennas due to its size.

EricF Yes, there is an English manual, as well as English firmware here https://github.com/HelloLeFei/SN_L You can use any USB to Serial adapter such as an FTDI to flash the new firmware via the GPS port. Any Ublox compatible GPS module will work as well. I have tested with BN220 and BN880 and both work well. You do not need the power module to use this. You can supply the 5v power via any 5v regulator

EricF No. This listing only comes with the main board as pictured.