ответы

thanse5 the user manual say this about the oscilloscope. 1Hz to 5MHz sensitivity is from 50-500mVpp. 5MHz to 10MHz-sensitivity is 500mv to 1Vpp. 10-20MHz sensitivity is 1V-3Vpp. so as you can see the sensitivity falls with increasing frequenzy,this is mainly caused by induction in the test leads at high frequenzy.

полезный (3)
Оплатить
ответы (3)

Q: Is it just soldering the wire in the led? Can it stick directly to the wall or wood?

Задавает nelson.aguieiras на 2019-07-09 17:05:26

thanse5 you have to mount them on a heatsink and use a fan to keep them cool,the better cooling the longer they will last.

полезный (0)
Оплатить
ответы (2)

Q: What is the frequency (Hz) for the 110v models?

Задавает Neogator26 на 2021-07-25 10:51:37

thanse5 this inverter will auto adjust to the frequency of your grid and it will auto adjust to the voltage too.MPPT=maximum powerpoint tracking.

полезный (0)
Оплатить
ответы (1)

thanse5 the camera is as described and has the speaker and mic as mentioned in the specs.

полезный (0)
Оплатить
ответы (2)

Q: is the camera compatible with the SAP HD android software?

Задавает argirisb на 2021-07-12 02:52:06

thanse5 the camera comes with the program i-cam+ ,suported by android but i do not know if it is compatible with SAP software.

полезный (1)
Оплатить
ответы (1)

thanse5 from the information i have working range is from -40 to +70C.if you can keep the temperature below 70C the chip will last longer, the lifetime of the chip is 5000+hrs if you have proper cooling,better cooling gives a longer lifetime for the chip.

полезный (0)
Оплатить
ответы (2)