Модуль точечной матрицы MAX7219 4 в 1 модуль отображения светодиодных индикаторов
Часть обзора переведена автоматически.
I first tried the dotMatrix on the Arduino with the Sprite and Matrix libraries. I got funny results because the column adressing is reversed. Therefore I switched to the MD_MAX72xx libraries. Make sure to change the define in the MD_MAX72xx. h file to read: #define USE_FC16_HW 1 I used the MD_Keyswitch library found at https://github.com/MajicDesigns/MD_KeySwitch and the MD_MAX72xx library found at https://github.com/MajicDesigns/MD_MAX72XX Then I pulled the source at https://github.com/MajicDesigns/MD_MAX72XX/blob/master/examples/MD_MAX72xx_ScrollChart/MD_MAX72xx_ScrollChart.ino With that you should be able to get it to work. If you use pins that are not-SPI standard, make sure to activate the call to MD_MAX72XX with four parameters, and comment out the one with two parameters.
Очень хороший продукт и хорошая цена. Если вы не знаете, как это работает, я нашел один хороший учебник. https://www.makerguides.com/max7219-led-dot-matrix-display-arduino-tutorial/ Если вы попробуете программы и увидите, что они не работают с первой. Попробуйте изменить имена контактов и перезагрузите программу на Arduino. в т.ч. CS_PIN 10 ИНФОРМАЦИЯ 11 CLK_PIN 13