Giving 12V, taking 5V, and drawing these currents from the output, the device temperature was getting at: 2.20A >100°C 1.52A 75.6°C 1.04A 56.6°C Room temperature was at 27°C. This is without any heat sink (and with low heat dissipation through the soldered leads (the amount of which is 4), because I made them not thick). You will keep it in a somewhat better conditions if either the current will not be so high or you'd make a thermal contact of it with some colder plate.

Giving 12V, taking 5V, and drawing these currents from the output, the device temperature was getting at: 2.20A >100°C 1.52A 75.6°C 1.04A 56.6°C Room temperature was at 27°C. This is without any heat sink (and with low heat dissipation through the soldered leads (the amount of which is 4), because I made them not thick). You will keep it in a somewhat better conditions if either the current will not be so high or you'd make a thermal contact of it with some colder plate.

Giving 12V, taking 5V, and drawing these currents from the output, the device temperature was getting at: 2.20A >100°C 1.52A 75.6°C 1.04A 56.6°C Room temperature was at 27°C. This is without any heat sink (and with low heat dissipation through the soldered leads (the amount of which is 4), because I made them not thick). You will keep it in a somewhat better conditions if either the current will not be so high or you'd make a thermal contact of it with some colder plate.

Дешевый и очень компактный бэк. Подойдет на мелколет. Фото в сравнении с популярным bec от matek

Дешевый и очень компактный бэк. Подойдет на мелколет. Фото в сравнении с популярным bec от matek

Дешевый и очень компактный бэк. Подойдет на мелколет. Фото в сравнении с популярным bec от matek