Does work with Flysky GT3C 8-channel mod version. Very small and light (see picture with other Flysky receivers for comparison). Binding is a bit of a hassle, as it is in the DasMikro Supermicro receivers (for Flysky). No bind plug needed, do not know, why one of the pics in the description shows a bind plug. The receiver does not come with a bind plug. For binding power up the receiver. It has a blue LED on the bottom. This LED has to flash, not only blink one time (what mine did in the beginning). The LED will flash only for few seconds (but flash). During this time rapidly switch on transmitter in binding mode. After some trials it bound. Then switch off everything and switch on again. After the successful binding the DasMikro RX will bind automatically to TX. No matter, if you switch on receiver first or transmitter first, it will work (rx starts with blue blinking LED - binding mode); normal way would be first switch on transmitter, then receiver (and first switch off receiver, then transmitter). Nice and small, recommended.

Does work with Flysky GT3C 8-channel mod version. Very small and light (see picture with other Flysky receivers for comparison). Binding is a bit of a hassle, as it is in the DasMikro Supermicro receivers (for Flysky). No bind plug needed, do not know, why one of the pics in the description shows a bind plug. The receiver does not come with a bind plug. For binding power up the receiver. It has a blue LED on the bottom. This LED has to flash, not only blink one time (what mine did in the beginning). The LED will flash only for few seconds (but flash). During this time rapidly switch on transmitter in binding mode. After some trials it bound. Then switch off everything and switch on again. After the successful binding the DasMikro RX will bind automatically to TX. No matter, if you switch on receiver first or transmitter first, it will work (rx starts with blue blinking LED - binding mode); normal way would be first switch on transmitter, then receiver (and first switch off receiver, then transmitter). Nice and small, recommended.

Does work with Flysky GT3C 8-channel mod version. Very small and light (see picture with other Flysky receivers for comparison). Binding is a bit of a hassle, as it is in the DasMikro Supermicro receivers (for Flysky). No bind plug needed, do not know, why one of the pics in the description shows a bind plug. The receiver does not come with a bind plug. For binding power up the receiver. It has a blue LED on the bottom. This LED has to flash, not only blink one time (what mine did in the beginning). The LED will flash only for few seconds (but flash). During this time rapidly switch on transmitter in binding mode. After some trials it bound. Then switch off everything and switch on again. After the successful binding the DasMikro RX will bind automatically to TX. No matter, if you switch on receiver first or transmitter first, it will work (rx starts with blue blinking LED - binding mode); normal way would be first switch on transmitter, then receiver (and first switch off receiver, then transmitter). Nice and small, recommended.

all good

all good

all good

Маленький, без антенны 6-часовой приемник, который я люблю использовать в области Scaler. Из-за компактности очень хорошо невидимы в скалере, который будет установлен и у вас есть 6ch

Kleiner, antennenloser 6ch Empfänger den ich gerne im Scaler Bereich einsetze. Durch die Kompaktheit sehr gut unsichtbar im Scaler zu verbauen und man hat 6ch

Маленький, без антенны 6-часовой приемник, который я люблю использовать в области Scaler. Из-за компактности очень хорошо невидимы в скалере, который будет установлен и у вас есть 6ch