DIY LCD/LED Плата контроллера экрана Монитор Набор Для входного интерфейса M.NT68676.2A HDMI + DVI + VGA + Звуковой пиксель 1024 * 768 Шаг точки 1 мм Обзоры

DIY LCD/LED Плата контроллера экрана Монитор Набор Для входного интерфейса M.NT68676.2A HDMI + DVI + VGA + Звуковой пиксель 1024 * 768 Шаг точки 1 мм

23,98€
~~29,51€~~
Купить сейчас

Отзывы покупателей

2.33 из 5

Просмотреть все 3 отзывы

5 звезда
1 (33.3%)
4 звезда
0 (0%)
3 звезда
0 (0%)
2 звезда
0 (0%)
1 звезда
2 (66.7%)

Написать отзыв Вы получите двойные Banggood поинты за отзыв если будете одним из трех первых кто оставит его!

Все отзывы (3)
Образ (0)
Видео (0)
Все звезды
- Все звезды(3)
- 5 Звезда(1)
- 4 Звезда(0)
- 3 Звезда(0)
- 2 Звезда(0)
- 1 Звезда(2)

Сортировать по:

оценке

оценке
полезности
дате

Отзывы только из вашей страны (Russian Federation)

Показать оригинал

Часть обзора переведена автоматически.

knshopVIP3
US
20/02/2018

board plainly marked 19200 x 1080

board plainly marked 19200 x 1080

board plainly marked 19200 x 1080
2

Комментарии

Показать оригинал
senorlocksmithVIP1
US
30/03/2018

Ordered this to work with a 14" LCD that works at 1024x768 resolution. It doesnt turn on the LCD. It tested working in a laptop currently and works just fine so its not the LCD. I have tried different inverters too but it still doesn't work. I am using a 12V 5A adapter so its not a problem with amps supply. The board gets hot in too many areas so I suspect bad QC. The LED lights up and dims out. Such a waste.

Ordered this to work with a 14" LCD that works at 1024x768 resolution. It doesnt turn on the LCD. It tested working in a laptop currently and works just fine so its not the LCD. I have tried different inverters too but it still doesn't work. I am using a 12V 5A adapter so its not a problem with amps supply. The board gets hot in too many areas so I suspect bad QC. The LED lights up and dims out. Such a waste.

Ordered this to work with a 14" LCD that works at 1024x768 resolution. It doesnt turn on the LCD. It tested working in a laptop currently and works just fine so its not the LCD. I have tried different inverters too but it still doesn't work. I am using a 12V 5A adapter so its not a problem with amps supply. The board gets hot in too many areas so I suspect bad QC. The LED lights up and dims out. Such a waste.
0

Комментарии (1)

Показать оригинал