Часть обзора переведена автоматически.
super sprawa potrzebowałem tego polecam
These tie rods are a very good upgrade to allow adjustment of toe out and camber. Plus adjusting the front ride height/shock preload. Adding 3-4mm worth of spacers to the rear upper strut rods, rolls the Diff & driveshaft to a MUCH BETTER /straighter angle than stock.
The size of the metal parts are not the same as the original plastic parts'. I have only partially upgraded my car yet with metal parts and I think mixing the two version is not the best. The plastic parts fits together better than mixed with metal. I hope the full metal setup will fit together as good as the plastic.
👍👍👍
These linkage rods look terrific. But it's what they do that is more important. Both of my x2 Across came with way too much toe-out. The tie rods allow the toe-out to be adjusted to the 0-1/16" toe-out spec I want. The Camber is also adjustable now but the stock setting was fine. The rear linkage rods, when lengthened 4 mm, allow the differential to be at a much better angle and the driveshaft is far more level through the suspension travel. A good thing.
OK iam получение пакета
Happy with the results but the first set I received was missing several pieces. Customer service was great though and a replacement was sent. Overall worth the wait though.
ottimo per jjrc q39
opcion partes, para ser usadas en los modelos 1/12 wltoys 12428 feiyue fy01 etc
Paczka szła ok 15 dni. Jakość wykonania bardzo dobra. nie ma się do czego przyczepić.