Все сообщения

Q: does it work on the direct feed extruder?

Задавает BG640845545 на 2020-11-19 09:43:46

helgjohn Yes it can work but not recommended due to single gear and low torque factor, this can or will lead to step skip and other issues. I suggest you find a geared extruder or something better design for direct extrusion.

2020-11-20 06:05:21 полезный (1)
Отправить
ответы (2)

Q: Can it be used for bigLABISTS?

Задавает raito0603 на 2020-11-05 12:08:00

helgjohn canyou specify more not sure what you mean. If used in any other machine it may fit but also my not fit with out some re working or adapter of sort

2020-11-09 11:19:43 полезный (0)
Отправить
ответы (1)

helgjohn theywill properly fit but the only way to be sure is to measure the one you got and order to suit... using the measurement to identify The tread size and so on. Or simply ask seller if they know before buying.

2020-11-09 11:12:54 полезный (0)
Отправить
ответы (1)

Q: is this also compatible with ender 3 v2 ?

Задавает incyi на 2020-11-01 05:02:45

helgjohn You can start by measuring clearance between the bed and gantry uprights if there is clearance you are properly good to go. As the ver.2 has printvolum on 220x220 and this product has 235 X 235 it shod fit but you my need to trim the sides to get it to fit.

2020-11-03 03:11:14 полезный (0)
Отправить
ответы (2)

Q: Can I use this on my cr-10 mini?

Задавает fiddo_o на 2019-12-30 12:48:40

helgjohn YESbut its not plugg and play you my need to compile new software to get all functions to work properly

2020-10-06 02:24:15 полезный (0)
Отправить
ответы (2)

Q: Works on Ender 3 V2 too?

Задавает GabeBR0808 на 2020-10-03 08:48:46

helgjohn yes the differ between v2 and v1 or tevo printers is manly electronic and some smaller design stuff but the frame and rollers are the same for most printers in this cat........

2020-10-03 03:25:21 полезный (0)
Отправить
ответы (4)

Q: what extruded does it use

Задавает BG401016432 на 2020-09-14 03:45:34

helgjohn it is all in the description but if its the nozzle you are wondering about is Volcano hot end and 0,4 size Stepper motor nema 17 TItan Extrude geared assy 3-1 ratio But all info about printer is in the add so just scroll down read the info. there are also several informative videos on youtube and on the internet in general lots of video that guide you true all setup use and Questions you my have

2020-09-21 03:37:31 полезный (0)
Отправить
ответы (1)

Q: Do these work with the stock ender 3?

Задавает leegp на 2020-09-18 10:48:33

helgjohn YES NO PROBLEM

2020-09-18 12:35:01 полезный (0)
Отправить
ответы (1)