Все сообщения

Q: Is there a need for a program card for a full conversion?

Задавает BG343921854 на 2021-08-25 01:57:10

hansnl Not specialy , but i liked to play with some parameters with my rebuild 144001 . Received this card recently, but did not too much with it. Also looked at YT for some technical explanation for this card, but what i've found were not really experts in what they are talking about.. Goodluck with your conversion ! Bye, Hans

2021-08-25 02:12:48 полезный (1)
Отправить
ответы (2)

hansnl Yes, the full kit including the program card you need to have. But also some mechanical skills to transfer the primary tooth-wheel from the brussed to the new brusless motor. It took me 45 minutes to fix that. To prevent this you better order a new primary tooth-wheel for about 8 dollars. I've also connected a GYC300 Gyro Module (Aliexpress 5 dollar) in series with the steering servo for improved stability during drifting . Success with your 144001 conversion. Bye, Hans

2021-08-17 04:15:02 полезный (1)
Отправить
ответы (2)

hansnl No this inverter does run on AC mains voltage (220 Volt) and is rectified to DC ~330 Volts. A external DC input, you should make yourself, probably this unit will work at a lower DC voltage.. Goodluck !

2021-08-10 02:57:35 полезный (0)
Отправить
ответы (1)

Q: Do you need an engine mount seat with this upgrade?

Задавает Noahb18 на 2021-07-29 12:07:25

hansnl No, the mounting holes of the brusless motor are eqal of the original motor with brushes. Also the axle of the motors are the same diameter. good luck !

2021-07-29 03:13:54 полезный (0)
Отправить
ответы (1)

Q: what is the maximum traveling speed of the laser head?

Задавает erik_eastwood на 2021-04-25 03:19:50

hansnl Fully depends on what you like to do with this, engrave ? Cut through ? Material properties ? Required quality of your engravings ? Laser head power ? Just maximum mechanical speed is pretty fast at least sufficient for most operations i use it for. Bye, Hans

2021-04-25 06:28:27 полезный (0)
Отправить
ответы (2)

Q: How do you pair the additional wireless chime? I can't figure it out

Задавает BG134735185 на 2021-04-10 04:56:56

hansnl In the Aiwit app , click sign (add device) and select the option to share by QR-code. This way it worked out for me. Adding a second DoorBell.To connect the optional wireless chime, is also described in the manual press the volume down button (becomes the Connect button) next press the doorbell button , and these devices are paired.Succes !

2021-04-10 07:26:20 полезный (1)
Отправить
ответы (5)

Q: What are two potentiometers for? What are they doing?

Задавает vaklev на 2021-03-30 03:34:03

hansnl The function of these potmeters are given in the specs 9: Input time of 1-50, cycle unit (1 cycles is 20 ms), current input (30-99%), The left is the timer , the right the power output from your (rewinded microwave) transformer. I would like you to show a picture of my constructed welding transformer, but can upload this using this banggood reply page. Good luck! Hans

2021-03-31 10:37:17 полезный (2)
Отправить
ответы (3)

Q: Which transmitter should I use for the tyro 79?

Задавает Dan на 2021-01-19 06:52:07

hansnl The Eachine Tyro79 is just a 3" quadcopter frame , but yes you can use this Flysky i6X transmitter combined with the X6B Receiver. This receiver is small enough to build into the Eachine Tyro79 frame.

2021-01-19 08:25:32 полезный (1)
Отправить
ответы (2)