Все сообщения

Q: What is thread pitch for M14. 1.5mm or 2mm pitch ?

Задавает BG551318420 на 2021-09-11 12:54:11

_Richard_ Ca't tell you the pitch, but the M14 adapter suits my angle grinder's pitch.

2021-09-11 01:21:55 полезный (0)
Оплатить
ответы (2)

Q: Is it posible to purchase the adapter M14 separatly? Would need one!

Задавает _Richard_ на 2019-09-22 02:04:27

wanee https://www.banggood.com/Drillpro-M14-Adapter-Replacement-Sanding-Belt-Adapter-for-115-125-Angle-Grinder-p-1341705.html

2019-09-28 02:24:56 полезный (2)
Оплатить
ответы (2)

Q: is it originally 18v

Задавает BG432132174 на 2021-04-23 02:15:58

_Richard_ In ideal conditions you might be able to get 18V but as soon as you draw current the voltage goes down.

2021-04-23 03:46:15 полезный (0)
Оплатить
ответы (2)

Q: are these clamps grounded?

Задавает BG574416338 на 2020-11-05 11:40:56

_Richard_ No, the clamps are not grounded, but if you want them grounded, i's an easy fix - just pull a wire through the arms.

2020-11-06 01:39:17 полезный (0)
Оплатить
ответы (7)

_Richard_ Camera is connected and powered? For me switch works just fine - I use the unit to monitor two old hardware samplers and it works just fine. Please have another view into the manual, where the colors of the wires and their use is described.

2020-09-23 04:08:02 полезный (0)
Оплатить
ответы (2)

_Richard_ Received mine two weeks ago and mine shows a mistake of 1,9 degree - I can turn it around on a 100% level benxch and it always shows - 1,9 degree. Did not find a way to correct that and do not (yet?) want to open the case.

2020-08-02 04:42:13 полезный (9)
Оплатить
ответы (3)

Q: is working outside? with sunlight?

Задавает sin33azucares на 2020-07-04 11:26:08

_Richard_ only for short distances.

2020-07-13 09:59:19 полезный (0)
Оплатить
ответы (3)

Q: Hi is waterproof or not?

Задавает nasos на 2019-07-14 03:55:06

_Richard_ Ido not thik so.

2020-06-26 03:31:14 полезный (0)
Оплатить
ответы (1)

_Richard_ there is one wire that tells the unit that there is a rear cam, when set to 12V - have a look at the manual. Leave it unconnected (or vconnect to ground) and you will be fine. I think I remember it was the pink wire, but better have a look at the manual.

2020-05-21 01:32:59 полезный (0)
Оплатить
ответы (2)