Все сообщения

enricotagliavini 17/09/2022
Do NOT buy this car for your kids. This is a great car for an enthusiast hobbyist that would like to fix and tune this car to make it run well and deal with the high maintenance it requires. Also do NOT buy the brushless version, it is massively over-geared and it cogs badly. With some significant work this car can become actually very good and worth the time needed to fix it. The car came without oil in the shocks (they were completely dry, nothing at all inside), without grease in the differentials, one of the differential crown gears was not screwed in all the way, it would have snapped at first use. The wheels geometry is all over the place, many screws are actually super glues in making it hard if not impossible to remove. For example differential pinion gears are screwed in the central drive shaft with a very small screw, which will snap when you try to remove it, so you will need to order spare parts. The upper chassis brace (second floor as WLtoys calls it) is very flexible, not providing the brace it is supposed to. It's probably a good idea to upgrade to metal. Bearings will also ceased quite quickly, they are not the best (still better than Arrma's), but can be replaced. The radio could use an upgrade too, the steering is way too sensitive and it cannot be set from the radio. Once all the above is fixed, is it a fun car? Yes it is. It's small and light, handles well and it's durable enough for what it is and the price tag. If you don't mind some the tuning project definitely get one.
0
рекомендации
Комментарии (1)

enricotagliavini To be fair, I found many more issues with this car after the first 2 days. Shocks were assembled incorrectly and missed some spacers, they could not hold oil inside and were good only to be trashed right away. One of the dogbone driveshaft at the back has a machining defect and would not allow full travel and made a lot of noise while running. Plastic is in general very brittle and broke in multiple points within the first run with no jumps or hard driving whatsoever. I\'m very disappointed and I\'m simply going to scrap this car, it\'s not worth repairing.

enricotagliavini 17/09/2022
Do NOT buy this car for your kids. This is a great car for an enthusiast hobbyist that would like to fix and tune this car to make it run well and deal with the high maintenance it requires. Also do NOT buy the brushless version, it is massively over-geared and it cogs badly. With some significant work this car can become actually very good and worth the time needed to fix it. The car came without oil in the shocks (they were completely dry, nothing at all inside), without grease in the differentials, one of the differential crown gears was not screwed in all the way, it would have snapped at first use. The wheels geometry is all over the place, many screws are actually super glues in making it hard if not impossible to remove. For example differential pinion gears are screwed in the central drive shaft with a very small screw, which will snap when you try to remove it, so you will need to order spare parts. The upper chassis brace (second floor as WLtoys calls it) is very flexible, not providing the brace it is supposed to. It's probably a good idea to upgrade to metal. Bearings will also ceased quite quickly, they are not the best (still better than Arrma's), but can be replaced. The radio could use an upgrade too, the steering is way too sensitive and it cannot be set from the radio. Once all the above is fixed, is it a fun car? Yes it is. It's small and light, handles well and it's durable enough for what it is and the price tag. If you don't mind some the tuning project definitely get one.
0
Комментарии (1)

Q: is this for a 1/8th scale or 1/10th scale?

Задавает rahorne24 на 2022-01-06 02:37:38

enricotagliavini This is intended for 1 - 10th scale, 1 - 8 scale are much heavier and need a more powerful system, usually at least 4S or 6S capable

2022-08-26 05:47:46 полезный (1)
Оплатить
ответы (3)

Q: for 6s lipo?

Задавает murilotodahora на 2020-12-09 04:24:37

enricotagliavini The ESC is for 6S LiPo, but the motor specs say "Max Voltage:<21V" which means 4S, maybe 5S...

2022-08-24 05:16:46 полезный (0)
Оплатить
ответы (3)

Q: Will this fit a rustler 4x4

Задавает BG471412156 на 2022-05-04 02:13:33

enricotagliavini No, you need a 36 mm diameter motor for the Rustler, it's a 1-10 scale car, not a 1-8 scale car, so you need to use the appropriate motor size, usually 2S and 3S compatible, not 6S.

2022-08-20 06:43:07 полезный (0)
Оплатить
ответы (1)

Q: Wie breit ist der Motor?

Задавает BG351834642 на 2022-07-18 01:41:23

enricotagliavini Standard36mm for 1:10 scale motors

2022-08-13 06:10:43 полезный (0)
Оплатить
ответы (1)

Q: wie lang ist der Motor?

Задавает BG853315166 на 2022-08-06 09:18:07

enricotagliavini 66mmnot counting the shaft. The shaft with 14mm long

2022-08-13 06:10:03 полезный (0)
Оплатить
ответы (1)