Все сообщения

Don Hamp This plane takes maybe 15 minutes to assemble. It’s very straight forward. The plane has a built in gyro and in beginner mode it is a safe bet that you will fly it fine. RC planes are tricky when orientations change, it’s best if you go to a local field and have someone there to help if possible. It’s a fantastic starter plane for the money.

2022-04-26 05:20:45 полезный (0)
Оплатить
ответы (1)

Q: It looks interesting but what does it do?

Задавает computerlen на 2021-08-08 04:26:01

Don Hamp It is a solder jig that holds deans and XT30, 60, and 90 connectors and the brass fittings. It just provides you with an additional hand to help hold things steady during the soldering process. Ive found it to be vet effective and valuable.

2021-08-08 05:56:45 полезный (0)
Оплатить
ответы (4)

Q: my remote does not connect the plane. How to enforce a new pairing?

Задавает MM3 на 2021-04-17 03:53:42

Don Hamp No you have to use the included remote. To pair you just turn on the plane then the remote. Then throttle up and then down and the lights will stop flashing and its ready to go.

2021-04-17 09:14:07 полезный (0)
Оплатить
ответы (1)

Q: It makes that anoying buzzing noise ?

Задавает Epsilonix на 2021-03-31 04:45:08

Don Hamp Yup, definitely does.

2021-03-31 05:23:52 полезный (0)
Оплатить
ответы (3)

Don Hamp Reversing the shaft is simple. It’s a couple of minute job. I have a couple of these motors. I’ve been pretty happy with them overall.

2020-11-06 10:21:47 полезный (0)
Оплатить
ответы (2)

Don Hamp Itincludes a carbon propeller that is an 11x 4 I believe. It is really too much prop for the Sunnysky 2216 - 1250. I have this same motor on my plane and it just pushes the motor way too hard and the motor comes back REALLY hot after a 5 minute flight on a 1250 mah battery. Ultimately I went with an APC 10x4 and it made all the difference in the world. It's a fun plane to fly.

2020-07-06 04:23:35 полезный (0)
Оплатить
ответы (1)