Все сообщения

Q: can i remove the shaft?

Задавает kerembp06 на 2020-11-06 12:01:43

BG391841816 Yes the shaft is removable. Need to remove the two grub screws that hold the shaft in. Separate the bell from the armature. Then use a block of wood to support the bell and a brass punch to remove the shaft. There is some good YouTube videos out there on the subject. Keep in mind the shaft is press fit into the bell.

2020-11-12 07:07:31 полезный (0)
Отправить
ответы (1)

Q: Can it handle 2s Lipo power (8.4v) ?

Задавает Bruce Hudson на 2020-11-10 09:28:22

BG391841816 The max voltage threshold is 6 volts. that means you CANNOT hook the battery directly to the receiver. You need to get a BEC or ESC to hook up to the battery. The output voltage of BEC is usually 5 volts which will work properly. Do NOT exceed the max voltage of electronics!! You will let the smoke out! haha

2020-11-12 06:54:22 полезный (0)
Отправить
ответы (1)

Q: voltage 4,5-6 V? or higher?

Задавает Meniu на 2020-11-07 04:09:51

BG391841816 This means the operating range is 4.5 volts up to 6 volts. Most BEC's will output 5 volts. Do NOT run ANY receiver directly off of the battery. Electronics max voltage threshold should never be exceeded, you will let the smoke out! haha

2020-11-12 06:48:15 полезный (2)
Отправить
ответы (1)

Q: Can I run this motor with a 12 blade fan and a bigger esc?

Задавает BG391841816 на 2020-10-28 02:43:45

cody do not suggest

2020-11-04 03:25:59 полезный (0)
Отправить
ответы (1)