Все сообщения

Aaron 2020-09-09 21:02:27
0
рекомендации
Комментарии (0)

Лучшие рецензенты, которые вам могут понравиться:

Q: Does it work with smartaudio?

Задавает Red_Baron на 2019-10-16 06:33:55

BG400211905 ---> Special firmware on the FC to get SA to work. <---

2020-08-25 08:08:48 полезный (0)
Отправить
ответы (2)

Q: what is the supply voltage range?

Задавает AaronSommers на 2018-08-26 10:36:21

humlebi1 The first line in the description; Working voltage: 3~12V

2020-07-20 02:42:29 полезный (0)
Отправить
ответы (2)

temporalflux I had this problem and managed to fix it. In Betaflight BF4.1.5 or later (might still work on BF4.1.0 to BF4.1.4, I'm not sure), go the Video Transmitter tab. First, make sure that you have the IRC Tramp VTxTable set up (just do a search for 'Betaflight VTXtables' and the first result should take you to the Betaflight GitHub page for VTxTables). Then (and, this is what fixed it for me), turn on the slider that says 'Enter frequency directly' and, save. Not sure if this matters but, I had mine originally set, under that slider, to 5733 (BOSCAM_B 1) on 25mW. I can now change it via the OSD to any of the other supported channels and power levels.Hope this helps, it worked for me.

2020-07-11 09:51:36 полезный (0)
Отправить
ответы (3)

Gdgolden maybe you can use the "contact us" to contact the banggood customer service team.

2020-06-11 03:16:20 полезный (0)
Отправить
ответы (1)
Aaron 2019-11-09 18:50:36
1
рекомендации
Комментарии (1)

Лучшие рецензенты, которые вам могут понравиться:

MinceR22 The version I had I could connect to a cleanflight - betaflight FC(inav didn't work) and it had a version of blheli_S on it.. I even reprogrammed it. So if you want to reprogramm via transmitter the normal BL Heli s manual should work. Was an older version of blheli so not sure everything works. Worked really well( after i updated to latest bl Heli s version) and had no overspeed problems with small props.

2020-04-18 03:39:13 полезный (0)
Отправить
ответы (1)

Q: So what is this exactly???

Задавает Aaron на 2020-02-13 08:32:14

Saltus This is a machine frame part for jjrc h36f model

2020-02-23 12:49:25 полезный (0)
Отправить
ответы (1)

Q: *edit* UARTS not 'parts' available for GPS?

Задавает AaronSommers на 2020-01-14 06:40:38

Pqgarvis you can connect gps via tx and rx by solder rx to tx and tx to rx

2020-02-17 03:51:56 полезный (0)
Отправить
ответы (1)

Q: Good for WLToys 20409? Front and rear for that car?

Задавает AaronSommers на 2019-05-15 05:00:19

Sayedbakhtyar no good for wltoy A959

2020-02-14 11:34:46 полезный (0)
Отправить
ответы (1)

Q: will this fit and work in the Cygnet 145mm as a replacement for its runcam split 2?

Задавает AaronSommers на 2019-12-09 04:32:43

Alowgo Howdy: The answer is kind of YES and kind of NO! It will fit but the Hybird uses 2 holes on each side of the camera for mounting! There forth the Hybird needs to have the 2 correct aluminum pieces that GepRC has made for the CineQueen to mount the Hybird properly in the same style of frame. I know this because I have already switches out the Split for the Hybird. So I contacted GepRC and ordered-bought the correct mounts from them! I hope this info helps you out. Later Alowgo

2020-02-06 11:48:15 полезный (1)
Отправить
ответы (2)
Aaron 2020-01-14 06:03:00
0
рекомендации
Комментарии (0)

Лучшие рецензенты, которые вам могут понравиться:

Aaron 2020-01-14 06:01:11
0
рекомендации
Комментарии (0)

Лучшие рецензенты, которые вам могут понравиться:

Aaron 2020-01-07 16:19:25
0
рекомендации
Комментарии (0)

Лучшие рецензенты, которые вам могут понравиться: