Все сообщения

OlibPics XT30 , R9MM or R9MX using SBUS in nR2 is OK (but no telemetry in remote control)), for S.Port soldering is needed to Tx1 (bidirectional) and put VTX input on Tx2 on the FC). Adapt Betaflight with RX on uart1 and ICR tramp on Uart2. pout the command set serialrx_provider = FPORT ;set serialrx_halfduplex = ON

2021-02-01 09:59:20 полезный (1)
Отправить
ответы (1)