Simon
мое содержание
Все сообщения
Отзывы
Комментарии
ответы
Вопросы

Все сообщения

Simon 30/09/2021
Very nice receiver. It's very small. Range is excellent, open source configurator makes it really easy to use. Update over wifi is just excellent. The price is ok, it used to be somewhat cheaper. Delivery was quick.
0.42 г Happymodel 2.4G ExpressLRS ELRS EP1 Nano с высокой частотой обновления сверхмаленький дальнобойный приемник для RC-дрона
US$19.59 US$25.99
0
рекомендации
Комментарии (0)
Simon 27/09/2021
This little plane is easy to build and comes with motor, ESC and servos. I upgraded the motor to XING 4200kv on 3s 850 Lipo with the 3" propeller. It reaches top speeds of 140km/h. The launch is a bit tricky it needs a lot of speed to climb. It's important to launch against the wind. Keep the model light, sub 250g. You can use a 20x20 flight control and tiny GPS. The price is a little bit high. The quality is very good, though. The plane comes in a nice sturdy box. A worthy competitor would be the Phenix 60, which also can be built under 250g. It's much cheaper but not as robust and comes in a fragile box.
ZOHD Dart250G 570мм размах крыльев Под-250 граммов Швабра Вперед Крыло AIO EPP FPV RC Самолет PNP КИТ
US$49.99 US$211.59
0
рекомендации
Комментарии (0)
Simon 27/09/2021
Very smooth and fast servo. Build quality is incredible. Price is good, this is an excellent servo. A very good choice for 1/8 buggies. For trucks and big cars a slower but stronger servo is recommended. Comes with a lot of plastic servo arms, screws, elastic caps and inserts. I recommend using an aluminium servo horn for more direct action.
JX Ecoboost CLS6322HV 21KG Большой Крутящий Момент 180° Цифровой Серводвигатель C CNC Алюминиевый Корпусная Металлическая Шестерня Сердечник
US$38.99 US$39.99
0
рекомендации
Комментарии (0)
Simon 27/09/2021
Very smooth and fast servo. Build quality is incredible. Price is good, this is an excellent servo. A very good choice for 1/8 buggies. For trucks and big cars a slower but stronger servo is recommended. Comes with a lot of plastic servo arms, screws, elastic caps and inserts. I recommend using an aluminium servo horn for more direct action.
JX Ecoboost CLS6322HV 21KG Большой Крутящий Момент 180° Цифровой Серводвигатель C CNC Алюминиевый Корпусная Металлическая Шестерня Сердечник
US$38.99 US$39.99
0
рекомендации
Комментарии (0)
Simon 27/09/2021
Very comfortable and easy to setup and really nice print quality. Price is also competitive (use coupon, if still valid). It's a really quiet printer, you can watch TV or work while it produces stuff for you in the same room. Things to take care: Print a bearing-based filament roller to reduce friction, or bowden tube for filament feed to avoid z irregularities (print head will pull itself up slightly!) - I also don't use the filament sensor. It has also a lot of friction. Unfortunately it's not shipped with latest Marlin, no support for new features like linear advance. I'm not sure if the default Cura preset uses bed leveling at all. First layer is perfect anyways. In PrusaSlicer you can enable ABL but it produces inconsistent first layers (on each print it seems to be different). I even drove the nozzle into the glass bed thanks to that. The hot extruder drips on the bed while homing exactly where the BLtouch will measure the end stop - this will cause trouble, so you must be present to clean off any ooze while it prepares the print! Adhesion PLA to glass bed is extreme. Wait for cooldown, 5-10 minutes then it's much easier to get off.
Принтер Artillery® GeniusPro & Genius 3D с максимальным размером печати 220 * 220 * 250 мм с ультра-тихим шаговым двигателем, сенсорным дисплеем TFT и поддержкой функции аварийного отключения питания.
US$349.00 US$567.57
0
рекомендации
Комментарии (0)
Simon 27/09/2021
The original OpenLager. It can log on SD card at high speeds. Config is simply done by text file on card. In BetaFlight just use any free serial port/UART to connect it and enable BlackBox recording via serial. It costs a little more than the Arduino/Atmel-based clones, but performs much better.
OpenLager 4 Bit SD Карта Data Logger Interface с режимом работы на частоте 19.2 МГц с DMA для RC Quadcopter Flight Controller
US$26.99 US$32.99
0
рекомендации
Комментарии (0)
Simon 27/09/2021
Very strong servo for a good price. I'm using it in an Arrma Notorious V5. I needed to stiffen the servo saver to get the power to the wheels. Aluminium servo horn is not included but is absolutely a must to harness this power. I can see a little play on the crown, but it could be that the plastic servo holder is just bending under the stress. Overall it's a great improvement on the steering and a very attractive price!
Racerstar BL7146HV 180 ° 46 КГ Бесколлекторный Metal Gear Digital Сервопривод Для RC Самолета Авто Робот
US$19.99 US$81.99
0
рекомендации
Комментарии (0)
Simon 27/09/2021
Quality is very good. It's easy to setup. The GPS is good. I use ExpressLRS on it, range is great. I also added a Vista Kit, image quality and range is very good. If you use 4s 850 Lipo you can achieve 10 minutes flight time. Some issues though: The quad has no baro and no I2C pins to add one. It has no beeper, for longer distance flights I recommend a battery-buffered buzzer like Vifly finder or hellgate buzzer. The antenna for the Vista is a hassle to mount. The cable has no space and gets a tight bend.
Diatone Roma F4 LR 4S Блок питания FPV Racing Drone Freestyle BN-180 GPS MAMBA F405DJI МИНИ FC F30MINI Blheli_S ESC 1404 3000KV Двигатель
US$163.99 US$196.99
0
рекомендации
Комментарии (0)
Simon 24/05/2018
Nice case, solid looks - but I miss the fuses between the lipos - in worst case you burn down your house...
Amass XT30 Параллельная зарядная плата, вход XT60, для зарядок iSDT D2 Q6 SC-608 SC-620
US$16.99 US$20.99
0
рекомендации
Комментарии (1)
Simon 13/03/2018
I didn't test the range, but it has SBUS, two antennas and smart port telemetry - perfect for modern quad builds! Note the switched polarity in the included cable!
Оригинальный Frsky & EACHINE 15x15 мм XSR-E D16 2.4G 16CH ACCST оцифрованный приемник SUBS CPPM
US$25.99 US$34.99
0
рекомендации
Комментарии (0)
Simon 13/03/2018
it shows everything you might want to know. I can't vouch for the precision but you can easily see if tablet or phone are charging with good current. The connectors are a bit bulky.
DANIU 2 в 1 Многофункциональный Type-c USB Tester PD Power Tester Volt Meterr Ammeter
US$12.37 US$18.56
0
рекомендации
Комментарии (0)
Simon 13/03/2018
I use it for the EV100 the cutouts are a little too big, but you can squeeze the foam to match. Very comfortable and yet very thin (must be thin for EV100 so you can see the corners!)
Заменные лицевые мягкие пенопластовые панели накладки подкладки на липучке для FPV очков Fatshark 2 шт
US$9.99 US$13.19
1
рекомендации
Комментарии (0)
Simon 13/03/2018
In my eyes still undefeated champion of the micro cams! The full image quality and setup options of the original XAT600/HS1177 CAD Sony HAD II 600TVL cam but in a sub 6g device! When my friends crap out on a cloudy overcast day late in the afternoon because they only see black ground, I still see everything!
RunCam Micro Swift 2 600TVL 2.1 / 2.3mm FOV 160/145 Степень 1/3 OSD CCD FPV камера для RC Дрон
US$30.61 US$42.22
0
рекомендации
Комментарии (0)
Simon 13/03/2018
I also own a Taranis X9D, I got this as a backup on a sale. The color is a bit extreme, but ok. The case appears cheaper. The display is smaller. Good: it also has the module bay! But it comes with new software and can flash receivers and stuff.
FrSky ACCST Taranis Q X7 2.4ГГц 16CH Режим 2 Радиопередатчик Синий Оранжевый для гоночных дронов RC FPV
US$139.99 US$179.99
0
рекомендации
Комментарии (0)
Simon 13/03/2018
I bought the RP-SMA version to pair it with a RTF quad which has the RP connector. It performs very good. The thick coating should protect it well, too.
GEPRC GEP-Pagoda2 5.8G 2dBi FPV Антенна SMA / RP-SMA Зеленый RHCP / синий LHCP 8,5 см 85 мм
US$7.78 US$19.08
0
рекомендации
Комментарии (0)
Simon 13/03/2018
I used it only a short time - the cabe is too much hassle. I modified an old mini DVR to have a customized connector. This DVR is the same electronics but in a different housing. The long cable and the buttons are not to my liking. It'd be better if the DVR was integrated in the goggles for 10 bucks more...
Eachine EV100 Микро AV Рекордер 1280*480 Мини DVR Модуль Поддержка 32G TF для FPV Очки Монитор Камера Приемник Дрон
US$14.99 US$28.79
0
рекомендации
Комментарии (0)
Simon 13/03/2018
since this patch antenna doesn't include the terminator I got this. the range is superb. the terminator is ok.
DANIU SMA женский джек на RP-SMA мужской джек RF коаксиальный адаптер соединитель
US$5.99 US$7.99
0
рекомендации
Комментарии (0)
Simon 13/03/2018
robust, powerful, quiet, smooth... they have it all! my recommendation!
2 пары DALPROP 5045 T5045 V2 3 Пропеллер Blade PC для QAV250 ZMR250 240 RC Дрон FPV Гоночный многороторный ротор
US$2.99
0
рекомендации
Комментарии (0)
Simon 13/03/2018
this antenna is fine 25mW and you can easily fly 400m without video fail! the flexible cable allows for pointing in any direction only downside - you must buy the 50Ohm terminator separately! so 1 star deducted for missing required accessory
Realacc Тройной питающий патч-1 5,8 ГГц 9,4дБи направленная циркулярно поляризованная FPV антенна Пагода для Fatshark DJI Eachine Goggles
US$15.55 US$26.39
0
рекомендации
Комментарии (0)
Simon 13/03/2018
not the fastest writing, but cheap! I also verified the declared capacity.
Карта памяти MIXZA Shark Edition 8GB TF-карта Class6 для Смартфон камера MP3
US$7.99
0
рекомендации
Комментарии (0)

Вы эксперт, можете ли вы помочь?

Мы искренне приглашаем вас подписаться на рассылку с ответом на приглашение!

Если вы подпишетесь, мы будем приглашать вас по электронной почте, чтобы ответить на вопросы людей о продуктах. Оформив подписку, вы также получите "Полезный значок "! Вы можете отказаться от подписки в любой момент на странице настроек конфиденциальности.

Помогайте другим и будьте счастливее!

  • Подписаться

О бейджах

Значки связаны с сообществом, и пользователи зарабатывают значки, создавая качественный контент, выполняя миссии или участвуя в специальных мероприятиях. У определенных людей также будет свой собственный эксклюзивный значок.
Значок генерального директора

Значок генерального директора принадлежит только начальнику Banggood.

Значки, которые вы можете заработать, скоро появятся
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe