bikinidan Nope. All recording has to be done on your 5G-capable WiFi device. However you can simply pull off the camera unit, unplug the 2-pin and 4-pin plugs,thus losing about 17gms and add an All-in-1 camera or keychain camera for much better video transmission or on-board SD card storage. The drone's all-up weight is about 153gms without the stock camera.

bikinidan Thank you, reynolds3953! Your helpful and sensible replies make a refreshing change to most of the useless clowns who post on here.

bikinidan The plane runs on a 2s 7.4v Lipo. Brushless motors give plenty of power. Unfortunately this model has some weird programming choices on its stabilized flight control board and no Manual Mode so cannot really be recommended. Check it out via RCGroups Forums as usual for real world user information.

bikinidan Yep. The protocol is the same, namely V seven six one four ch, so all the transmitters are swappable. You will just lose any function that is not supported by the flight board and transmitter that you choose to use.

bikinidan I take it you are referring to the pictures showing the 2 and 3 battery option versions at the top left of the advertisement, since the rest of the sales blurb makes it clear that it uses a 2s battery? That is just the usual problem of letting the boss's bimbo office girl loose in the ad department again! EDIT! It appears that the listing has been edited now to show a new Eachine edition of the 500mm brushless V76802 P-51 - something more akin to a brushless 1-cell version of the V761 400mm P-51. It will be interesting to see what purchasers receive and how well it performs. QC101 will have a video up shortly.

bikinidan BG456123616 - Your information is NOT correct! Please remove it! The lights default to solid on at start-up. You can cycle them from that to flashing to off and back to solid on by each short press of the Lights button on the transmitter. The Stick Mode can be changed easily from the usually supplied Mode 2 to Mode 1 - READ THE MANUAL!! In fact it is possible to chose ANY of the 4 Stick Modes by switching the gimbals and where they plug into plus pressing the aileron trim button to the left while turning on the transmitter as required.