These are a great buy, a little pricey but time will prove it's value in usage. The one bug is the power plug it comes with. The adapter makes it easily usable in Australia (and others that use our GPO style) but Active & Neutral are swapped over. This means the Neutral wire is switched off and on at the GPO and the Active (Actually the Neutral) is switched off and on on the local switch on the side of the case. This may be an issue with some. I cut up and replaced the power plug to correct it. A weight in or under the iron holder improves it's usage immensely

These are a great buy, a little pricey but time will prove it's value in usage. The one bug is the power plug it comes with. The adapter makes it easily usable in Australia (and others that use our GPO style) but Active & Neutral are swapped over. This means the Neutral wire is switched off and on at the GPO and the Active (Actually the Neutral) is switched off and on on the local switch on the side of the case. This may be an issue with some. I cut up and replaced the power plug to correct it. A weight in or under the iron holder improves it's usage immensely

These are a great buy, a little pricey but time will prove it's value in usage. The one bug is the power plug it comes with. The adapter makes it easily usable in Australia (and others that use our GPO style) but Active & Neutral are swapped over. This means the Neutral wire is switched off and on at the GPO and the Active (Actually the Neutral) is switched off and on on the local switch on the side of the case. This may be an issue with some. I cut up and replaced the power plug to correct it. A weight in or under the iron holder improves it's usage immensely

seems good, we will start to use immediately !

seems good, we will start to use immediately !

seems good, we will start to use immediately !

Очень довольны продуктами.

Very happy with the products.

Очень довольны продуктами.

top

top

top

Все получены в одном экземпляре

All received in one piece

Все получены в одном экземпляре

Превосходный продукт, прибывший быстро и в отличном состоянии..

excelente produto, chegou rápido e em perfeitas condições..

Превосходный продукт, прибывший быстро и в отличном состоянии..

Correspond to what was expeced.

Correspond to what was expeced.

Correspond to what was expeced.

I do around two electronics projects a year, but these tend to be fairly intense when it comes to soldering, such as keyboards. It's enough that I want a good soldering station, but not so much that I would feel comfortable spending the AUD165.00 it would cost for a Hakko. For me, this Yihua model is the perfect compromise. It has the features I want, such as a temperature readout, and it makes use of high quality components in areas such as the heating element. One thing I should say, is that you need to be very careful when purchasing the the 937D, or the slightly less expensive 935. There are just so many "copies" out there! Many of them exactly duplicate the Yihua design -- externally, not the internal components -- and some of them even have the Yihua branding on them. This is a very sturdy, solid feeling unit. The on/off switch has a very positive feel to it, and the dampening on the dial that controls the temperature setting is really ideal --it doesn't just spin freely, but there isn't too much friction. The temperature setting (which I think is only in Celsius, which really suits me) is done by turning the dial until the LED displays the desired temperate, After a moment, the display goes back to showing the actual soldering tip temperature, until it increases to the desired setting, at which time the heating light goes off. That is really the ideal way of doing it, I think. The unit shipped to me came complete with a conversion plug to the Australian plug type, which I didn't expect, as well as a spare. replacement heating element. I was so impressed by that. Thank you, Yihua! Anyway, from the perspective of an Australian consumer, this looks like a really good choice for the money (about half what a Hakko would have cost me). I've just only done a couple of test solders, but so far it is something I would really recommend.

I do around two electronics projects a year, but these tend to be fairly intense when it comes to soldering, such as keyboards. It's enough that I want a good soldering station, but not so much that I would feel comfortable spending the AUD165.00 it would cost for a Hakko. For me, this Yihua model is the perfect compromise. It has the features I want, such as a temperature readout, and it makes use of high quality components in areas such as the heating element. One thing I should say, is that you need to be very careful when purchasing the the 937D, or the slightly less expensive 935. There are just so many "copies" out there! Many of them exactly duplicate the Yihua design -- externally, not the internal components -- and some of them even have the Yihua branding on them. This is a very sturdy, solid feeling unit. The on/off switch has a very positive feel to it, and the dampening on the dial that controls the temperature setting is really ideal --it doesn't just spin freely, but there isn't too much friction. The temperature setting (which I think is only in Celsius, which really suits me) is done by turning the dial until the LED displays the desired temperate, After a moment, the display goes back to showing the actual soldering tip temperature, until it increases to the desired setting, at which time the heating light goes off. That is really the ideal way of doing it, I think. The unit shipped to me came complete with a conversion plug to the Australian plug type, which I didn't expect, as well as a spare. replacement heating element. I was so impressed by that. Thank you, Yihua! Anyway, from the perspective of an Australian consumer, this looks like a really good choice for the money (about half what a Hakko would have cost me). I've just only done a couple of test solders, but so far it is something I would really recommend.

I do around two electronics projects a year, but these tend to be fairly intense when it comes to soldering, such as keyboards. It's enough that I want a good soldering station, but not so much that I would feel comfortable spending the AUD165.00 it would cost for a Hakko. For me, this Yihua model is the perfect compromise. It has the features I want, such as a temperature readout, and it makes use of high quality components in areas such as the heating element. One thing I should say, is that you need to be very careful when purchasing the the 937D, or the slightly less expensive 935. There are just so many "copies" out there! Many of them exactly duplicate the Yihua design -- externally, not the internal components -- and some of them even have the Yihua branding on them. This is a very sturdy, solid feeling unit. The on/off switch has a very positive feel to it, and the dampening on the dial that controls the temperature setting is really ideal --it doesn't just spin freely, but there isn't too much friction. The temperature setting (which I think is only in Celsius, which really suits me) is done by turning the dial until the LED displays the desired temperate, After a moment, the display goes back to showing the actual soldering tip temperature, until it increases to the desired setting, at which time the heating light goes off. That is really the ideal way of doing it, I think. The unit shipped to me came complete with a conversion plug to the Australian plug type, which I didn't expect, as well as a spare. replacement heating element. I was so impressed by that. Thank you, Yihua! Anyway, from the perspective of an Australian consumer, this looks like a really good choice for the money (about half what a Hakko would have cost me). I've just only done a couple of test solders, but so far it is something I would really recommend.

chegou bem embalado, tudo certo

chegou bem embalado, tudo certo

chegou bem embalado, tudo certo

Fast Shipping to NZ in under three weeks. Well packaged in cardboard box and item arrived in perfect condition. Comes with an AC adapter for NZ connection which is earthed as one would expect. This AC adapter is not obtrusive and the thought of fitting a local plug end on is not something I will bother with. After installation of connections, & power up, unit reached operating temperature rapidly to set temp and performed perfectly. The station is small enough to be again, unobtrusive, sitting snugly in place of easy reach. I would have liked a little longer connection lead to the iron (900mm) however this is a personal thing and the fitting is more than appropriate. I recommend this unit & store to future purchasers who are thinking of owning a well constructed, solid and smart looking soldering station which incorporates a decent transformer for power delivery.

Fast Shipping to NZ in under three weeks. Well packaged in cardboard box and item arrived in perfect condition. Comes with an AC adapter for NZ connection which is earthed as one would expect. This AC adapter is not obtrusive and the thought of fitting a local plug end on is not something I will bother with. After installation of connections, & power up, unit reached operating temperature rapidly to set temp and performed perfectly. The station is small enough to be again, unobtrusive, sitting snugly in place of easy reach. I would have liked a little longer connection lead to the iron (900mm) however this is a personal thing and the fitting is more than appropriate. I recommend this unit & store to future purchasers who are thinking of owning a well constructed, solid and smart looking soldering station which incorporates a decent transformer for power delivery.

Fast Shipping to NZ in under three weeks. Well packaged in cardboard box and item arrived in perfect condition. Comes with an AC adapter for NZ connection which is earthed as one would expect. This AC adapter is not obtrusive and the thought of fitting a local plug end on is not something I will bother with. After installation of connections, & power up, unit reached operating temperature rapidly to set temp and performed perfectly. The station is small enough to be again, unobtrusive, sitting snugly in place of easy reach. I would have liked a little longer connection lead to the iron (900mm) however this is a personal thing and the fitting is more than appropriate. I recommend this unit & store to future purchasers who are thinking of owning a well constructed, solid and smart looking soldering station which incorporates a decent transformer for power delivery.