I bought it for WLtoys V977 instead of dedicated metal upgrade. For servo arms have to screw this balls: http://www.banggood.com/Orlandoo-F150-OH35P01-KIT-Parts-Ball-Head-Screw-14Pcs-TA0011-p-987038.html?rmmds=myorder Servo linkage are with ball-links instead primitive hooks, additionally now can adjust the blade grip angle.

I bought it for WLtoys V977 instead of dedicated metal upgrade. For servo arms have to screw this balls: http://www.banggood.com/Orlandoo-F150-OH35P01-KIT-Parts-Ball-Head-Screw-14Pcs-TA0011-p-987038.html?rmmds=myorder Servo linkage are with ball-links instead primitive hooks, additionally now can adjust the blade grip angle.

I bought it for WLtoys V977 instead of dedicated metal upgrade. For servo arms have to screw this balls: http://www.banggood.com/Orlandoo-F150-OH35P01-KIT-Parts-Ball-Head-Screw-14Pcs-TA0011-p-987038.html?rmmds=myorder Servo linkage are with ball-links instead primitive hooks, additionally now can adjust the blade grip angle.

ЧПУ перегружен ЧПУ хорошо обработан и отлично подходит для миниЦП размера Heli. Никаких проблем. pic CNC miniCP сверху и V950 снизу для сравнения размеров (miniCP не подходит V950).

CNC is maxhined CNC is machined well and great for the miniCP sized heli. No issues. pic of miniCP CNC at top & V950 bottom for size comparison (miniCP doesn’t suit V950).

ЧПУ перегружен ЧПУ хорошо обработан и отлично подходит для миниЦП размера Heli. Никаких проблем. pic CNC miniCP сверху и V950 снизу для сравнения размеров (miniCP не подходит V950).

1.Изначально зазор между главным валом и тарелкой перекоса 0.1мм!!!Для таких диаметров это не допустимо! Как результат,верт не возможно триммировать,его пост. уводит в разные стороны.2.Вал от проворота тарелки перекоса в раму не лезет(genius cp) , доработал сам надфилем.3.Ни один винт из комплекта не подошел под резьбу крепления лопастей.Вывод: для того чтобы полетать"блинчиком" или просто красиво смотрелся на полке -пойдет,но с такими люфтами в тарелке перекоса,не о каком 3D пилотаже речи быть не может!!! Используйте с оригинальной тарелкой и будет все Ok.

1.Изначально зазор между главным валом и тарелкой перекоса 0.1мм!!!Для таких диаметров это не допустимо! Как результат,верт не возможно триммировать,его пост. уводит в разные стороны.2.Вал от проворота тарелки перекоса в раму не лезет(genius cp) , доработал сам надфилем.3.Ни один винт из комплекта не подошел под резьбу крепления лопастей.Вывод: для того чтобы полетать"блинчиком" или просто красиво смотрелся на полке -пойдет,но с такими люфтами в тарелке перекоса,не о каком 3D пилотаже речи быть не может!!! Используйте с оригинальной тарелкой и будет все Ok.

1.Изначально зазор между главным валом и тарелкой перекоса 0.1мм!!!Для таких диаметров это не допустимо! Как результат,верт не возможно триммировать,его пост. уводит в разные стороны.2.Вал от проворота тарелки перекоса в раму не лезет(genius cp) , доработал сам надфилем.3.Ни один винт из комплекта не подошел под резьбу крепления лопастей.Вывод: для того чтобы полетать"блинчиком" или просто красиво смотрелся на полке -пойдет,но с такими люфтами в тарелке перекоса,не о каком 3D пилотаже речи быть не может!!! Используйте с оригинальной тарелкой и будет все Ok.

okay...as with all these alu head upgrades..dont order without buying a new feathering shaft as you need to complete build, it is always impossible to remove old shaft from head with damage. this head is well machined but NONE of the supplied screws fit anywhere, you need to swap across old screws from original head, blade holder seem tight on curve of blade so possible tracking issues later. once fitted heli looks great and flies okay, worried about some of screws as they are not as good a fit as i would like

okay...as with all these alu head upgrades..dont order without buying a new feathering shaft as you need to complete build, it is always impossible to remove old shaft from head with damage. this head is well machined but NONE of the supplied screws fit anywhere, you need to swap across old screws from original head, blade holder seem tight on curve of blade so possible tracking issues later. once fitted heli looks great and flies okay, worried about some of screws as they are not as good a fit as i would like

okay...as with all these alu head upgrades..dont order without buying a new feathering shaft as you need to complete build, it is always impossible to remove old shaft from head with damage. this head is well machined but NONE of the supplied screws fit anywhere, you need to swap across old screws from original head, blade holder seem tight on curve of blade so possible tracking issues later. once fitted heli looks great and flies okay, worried about some of screws as they are not as good a fit as i would like

I can't recommend these spare parts to purchase because of bad quality of them. They look well, but when you try using them you will see that it's not strong and durable. I experienced 2 crashes because of something was wrong with new head (screw fell off and etc.).

I can't recommend these spare parts to purchase because of bad quality of them. They look well, but when you try using them you will see that it's not strong and durable. I experienced 2 crashes because of something was wrong with new head (screw fell off and etc.).

I can't recommend these spare parts to purchase because of bad quality of them. They look well, but when you try using them you will see that it's not strong and durable. I experienced 2 crashes because of something was wrong with new head (screw fell off and etc.).

Там была ошибка, я случайно отметил полученную вкладку, но это не так, и теперь она больше не позволяет мне следить. Пожалуйста, сообщите мне о состоянии этой поставки.

Ha habido un error, he marcado sin querer la pestaña de recibido pero no es cierto y ahora ya no me deja hacer el seguimiento. Por favor podeis informarme del estado de este envío.

Там была ошибка, я случайно отметил полученную вкладку, но это не так, и теперь она больше не позволяет мне следить. Пожалуйста, сообщите мне о состоянии этой поставки.

looks great, remember to lock tight the screws so that they do not come loose. additionally you must buy a new feathering shaft as removing the old one is almost impossible. not sure how the added weight will affect the Heli without the brushless upgrade. hears hoping

looks great, remember to lock tight the screws so that they do not come loose. additionally you must buy a new feathering shaft as removing the old one is almost impossible. not sure how the added weight will affect the Heli without the brushless upgrade. hears hoping

looks great, remember to lock tight the screws so that they do not come loose. additionally you must buy a new feathering shaft as removing the old one is almost impossible. not sure how the added weight will affect the Heli without the brushless upgrade. hears hoping

Needed to also order bearing kit as it was not too easy to remove from old head. Also had to go online to search out "how to" video for installation because there is nothing included with the head.

Needed to also order bearing kit as it was not too easy to remove from old head. Also had to go online to search out "how to" video for installation because there is nothing included with the head.

Needed to also order bearing kit as it was not too easy to remove from old head. Also had to go online to search out "how to" video for installation because there is nothing included with the head.

Very Nice.. and quick shipping by banggood..would do business again and again

Very Nice.. and quick shipping by banggood..would do business again and again

Very Nice.. and quick shipping by banggood..would do business again and again

Не так как в картинке бит еще очень хорошее качество!

not as in picture bit still very good quality!

Не так как в картинке бит еще очень хорошее качество!