Отзывы покупателей

4.98 из 5
Написать отзыв
  • Все отзывы (362)
  • Образ (59)
  • Видео (27)
  • Все звезды
    • Все звезды(362)
    • 5 Звезда(356)
    • 4 Звезда(5)
    • 3 Звезда(1)
    • 2 Звезда(0)
    • 1 Звезда(0)
Сортировать по:
  • оценке
  • полезности
  • дате
  • 2020-08-10 22:13:43

    This wing is a tank. so tough and very good flier for beginner and advance pilots. if you are a beginner just start with 3s 1800mah or 4s 1300mah just to keep the over all weight down and you have no problem at the launch. for more advanced pilots you can go 6s 3000mah for super long rang and you will have to tune the pids to make it easy launch. For bigginers its perfect because doesn't matter how many times to cash it hard it will take it like real man. Great wing. this is my 3rd S800 wing. one

  • 2020-07-27 08:08:10

    arrivato con scatola un po schiacciata però tutto bene...

  • 2020-01-12 08:05:25

    all good uhu por is the best glue!! hope it flying good!!

  • ILYA_W
    2017-10-08 08:19:33

    Качество хорошее, материал плотный! Есть не большие недочеты на всех швах от пресс формы, но аккуратно ножом можно подрезать. модель не супер отлита. Пена вроде спечена плотно. На элевонах нужно ставить петли, но это моё мнение. Комплект весь, но не нет проставки для мотора, Spare

  • leden
    2017-02-03 11:35:28

    This little wing is very tough, has a nice finish and is beautiful. The precut holes for the servos, ESC, RX and TX made it very easy to build and give it a very nice finish look. Surprisingly the manual both for the flying wing and the on board PCB is perfect. Speaking of PCB, it is a very nice touch. The center part hole is large for a flying wing of this category, you can easily fit a 3S 2200mhA batterie. Further more the package is well done, no damage and quick delivery (I order two separately) Overall

  • domepat
    2017-10-11 14:44:46

    Pacco arrivato in buone condizioni nella confezione è presente anche un power distribution board con modulo BEC che credevo fosse incluso . Inserito un Flight controller CC3D motore sunnysky X2204 2300 Kv ricevitore frsky V8R7 II ESC EMAX 20A un po grosso bisogna ricavare spazio . Attenzione nel scegliere la posizione per il perno di plastica da forare nell'ala. Tenersi piu distante vedi foto ala sinistra dall'alto.

  • xoxpox
    2017-07-03 11:00:19

    спасибо быстрая доставка в Москву. переживал что обманят как на Aliexpress. товар запакован очень хорошо все детали целые. продавец очень быстро отвечал по почте прислал скан квитанции об отправке товара. трек отслеживания на территории Англии. советую продавца буду покупать ещё

  • esilviu
    2017-05-18 10:28:17

    EPP material with no adjustments, exactly as removed from the mold. Parts fit together pretty well. See attached image for my way of mounting the motor. On the right wing, the foam beads seems to have weaker bonds. Will see after a crash or two :) Easy to glue using "prenandez/Aderpren" (in Romania/Moldova) - the usual shoes glue. Nice non-magnetic screws, but 8 (4+4) strong magnets on the lid. In order to use a magnetic compass close to the center of the wing it will be necessary to remove the magnets

  • 2018-12-29 06:17:16

    Easy to build and looks awesome. Perfect product and great finish. Not to mention that it is very resistant . My favorite build so far is with a BR2212 motor and 80 amp esc . I use 2200mah 3s and get 10 to 20 minutes flight time depending on how hard I drive it.

    Комментарии (2)
  • stas2k
    2017-08-14 11:38:13

    Great flying wing that I put from parts of my crashed drone. Just get 2 digital 9 gram servos and you can reuse drone parts to put it together. Neze32 will be used with iNav

    Комментарии (3)

    Go to page



    recommendation for you
    • US$47.29
    • US$79.99
    • US$93.62
    • US$56.99
    • US$83.99
    • US$22.90
    • US$43.99
    • US$6.99
    • US$88.65
    • US$3.70
    • US$89.99
    • US$88.99
    • US$95.99
    • US$84.99
    • US$59.99
    • US$68.99
    • US$6.65
    • US$75.99