Доставить в United Kingdom , USD
Самый положительный отзыв о %s на Banggood, Покупайте лучший %s по самой низкой цене на Banggood. Просмотрите самый полезный положительный отзыв о %s перед покупкой., радиоуправляемые игрушки, забавные виды спорта, фэшн, популярная электроника
BG574865414 17/08/2019
I had fun putting this together with the main module. Note the case ships with two 7-way sockets that need to be soldered in place of the ZIF socket (then insert the ZIF into these standoffs) in order to raise the socket to the correct height to clear the case! The main kit ships with a green socket that appears to have gold-plated contacts. The case ships with a black socket but it seems to have nickel contacts, So I chose to use the green one. The rotary encoder shaft will protrude just the correct amount to accept the included knob, and the supplied nut will not be used at all. In the correct position the knob was a loose fit so I rotated it slightly before pushing it onto the shaft. There is no cutout for the LED so I drilled a 4mm hole in line with the hole for the encoder shaft (vertically), and 1mm lower than the top edge of the slot for the ZIF socket (horizontally). I did not make a hole in the self-adhesive overlay so I just see a pale red glow from the LED, but I might drill a tiny 1.5mm hole in the overlay. The 9V battery clip wires need to be passed through the battery compartment before soldering them onto the main PCB. The wires must all be within the battery compartment for the case to close.
1
Комментарии
Оплатить
Онлайн-консультант
Опрос удовлетворенности

Скачать приложение, чтобы получить эксклюзивный 10% off купон