The module seems very big at first sight but is very small... The Module supports the Micro SIM card... I tried some of the example codes and they worked just fine... I connected the given patch antenna and I didn't face any issues... I'm from India and here GPRS is still supported I used Vodafone Sim and it worked just fine... the jst connector for the battery is also great... overall satisfied and must try for all IoT enthusiasts

The module seems very big at first sight but is very small... The Module supports the Micro SIM card... I tried some of the example codes and they worked just fine... I connected the given patch antenna and I didn't face any issues... I'm from India and here GPRS is still supported I used Vodafone Sim and it worked just fine... the jst connector for the battery is also great... overall satisfied and must try for all IoT enthusiasts

The module seems very big at first sight but is very small... The Module supports the Micro SIM card... I tried some of the example codes and they worked just fine... I connected the given patch antenna and I didn't face any issues... I'm from India and here GPRS is still supported I used Vodafone Sim and it worked just fine... the jst connector for the battery is also great... overall satisfied and must try for all IoT enthusiasts

This module has arrived in intact. I soldered the terminal pins. Unfortunately, the distance between the pin rows does not match the 1/10 inch raster. So it can be used with female jumper cables or PCB designed for this purpose. I have not tested yet. I will buy a type-C USB cable for it, or I can connect to power and TX/RX pins. :-)

This module has arrived in intact. I soldered the terminal pins. Unfortunately, the distance between the pin rows does not match the 1/10 inch raster. So it can be used with female jumper cables or PCB designed for this purpose. I have not tested yet. I will buy a type-C USB cable for it, or I can connect to power and TX/RX pins. :-)

This module has arrived in intact. I soldered the terminal pins. Unfortunately, the distance between the pin rows does not match the 1/10 inch raster. So it can be used with female jumper cables or PCB designed for this purpose. I have not tested yet. I will buy a type-C USB cable for it, or I can connect to power and TX/RX pins. :-)

I have made a GPS Tracker, alarm and surveillance system for my boat using: "LILYGO® TTGO T-Call V1.3 ESP32 Wireless Module GPRS Antenna SIM Card SIM800L Board" "GPS Module with Ceramic Antenna GPS Receiver TTL9600 for APM PIX PX4 CC3D Naze32 F3" "Geekcreit® RX500A 315/433MHz High Sensitivity Superheterodyne Wireless Receiver Module" "DIGOO DG-HOSA Wireless Remote Controller for Smart Home Security Alarm System Kits - white" "433MHZ Wireless PIR Sensor Motion Alarm Sensor Low Power LED Reminder Infrared Detector Work with Smart Home Security Alarm Hub System" "GS-WDS07 Wireless Door Magnetic Strip 433MHz for Security Alarm Home System" Programmed in C, using Arduino IDE.. The system is using 56mA and can be accessed using WiFi og SMS.. It is brilliant :) and at a price below 30$

I have made a GPS Tracker, alarm and surveillance system for my boat using: "LILYGO® TTGO T-Call V1.3 ESP32 Wireless Module GPRS Antenna SIM Card SIM800L Board" "GPS Module with Ceramic Antenna GPS Receiver TTL9600 for APM PIX PX4 CC3D Naze32 F3" "Geekcreit® RX500A 315/433MHz High Sensitivity Superheterodyne Wireless Receiver Module" "DIGOO DG-HOSA Wireless Remote Controller for Smart Home Security Alarm System Kits - white" "433MHZ Wireless PIR Sensor Motion Alarm Sensor Low Power LED Reminder Infrared Detector Work with Smart Home Security Alarm Hub System" "GS-WDS07 Wireless Door Magnetic Strip 433MHz for Security Alarm Home System" Programmed in C, using Arduino IDE.. The system is using 56mA and can be accessed using WiFi og SMS.. It is brilliant :) and at a price below 30$

I have made a GPS Tracker, alarm and surveillance system for my boat using: "LILYGO® TTGO T-Call V1.3 ESP32 Wireless Module GPRS Antenna SIM Card SIM800L Board" "GPS Module with Ceramic Antenna GPS Receiver TTL9600 for APM PIX PX4 CC3D Naze32 F3" "Geekcreit® RX500A 315/433MHz High Sensitivity Superheterodyne Wireless Receiver Module" "DIGOO DG-HOSA Wireless Remote Controller for Smart Home Security Alarm System Kits - white" "433MHZ Wireless PIR Sensor Motion Alarm Sensor Low Power LED Reminder Infrared Detector Work with Smart Home Security Alarm Hub System" "GS-WDS07 Wireless Door Magnetic Strip 433MHz for Security Alarm Home System" Programmed in C, using Arduino IDE.. The system is using 56mA and can be accessed using WiFi og SMS.. It is brilliant :) and at a price below 30$

Плата отличного качества маска чёрная матовая, монтаж аккуратный комплект полный. Очень доволен.

Плата отличного качества маска чёрная матовая, монтаж аккуратный комплект полный. Очень доволен.

Плата отличного качества маска чёрная матовая, монтаж аккуратный комплект полный. Очень доволен.

Fast received, finishing quality is good. but packing not satisfied(Polythene only no bubble wrap. it should in a box) and I experienced memory dump issue with restarting continuously (pic attached).

Fast received, finishing quality is good. but packing not satisfied(Polythene only no bubble wrap. it should in a box) and I experienced memory dump issue with restarting continuously (pic attached).

Fast received, finishing quality is good. but packing not satisfied(Polythene only no bubble wrap. it should in a box) and I experienced memory dump issue with restarting continuously (pic attached).

I have made a GPS Tracker, alarm and surveillance system for my boat using: "LILYGO® TTGO T-Call V1.3 ESP32 Wireless Module GPRS Antenna SIM Card SIM800L Board" "GPS Module with Ceramic Antenna GPS Receiver TTL9600 for APM PIX PX4 CC3D Naze32 F3" "Geekcreit® RX500A 315/433MHz High Sensitivity Superheterodyne Wireless Receiver Module" "DIGOO DG-HOSA Wireless Remote Controller for Smart Home Security Alarm System Kits - white" "433MHZ Wireless PIR Sensor Motion Alarm Sensor Low Power LED Reminder Infrared Detector Work with Smart Home Security Alarm Hub System" "GS-WDS07 Wireless Door Magnetic Strip 433MHz for Security Alarm Home System" Programmed in C, using Arduino IDE.. The system is using 56mA and can be accessed using WiFi og SMS.. It is brilliant :) and at a price below 30$

I have made a GPS Tracker, alarm and surveillance system for my boat using: "LILYGO® TTGO T-Call V1.3 ESP32 Wireless Module GPRS Antenna SIM Card SIM800L Board" "GPS Module with Ceramic Antenna GPS Receiver TTL9600 for APM PIX PX4 CC3D Naze32 F3" "Geekcreit® RX500A 315/433MHz High Sensitivity Superheterodyne Wireless Receiver Module" "DIGOO DG-HOSA Wireless Remote Controller for Smart Home Security Alarm System Kits - white" "433MHZ Wireless PIR Sensor Motion Alarm Sensor Low Power LED Reminder Infrared Detector Work with Smart Home Security Alarm Hub System" "GS-WDS07 Wireless Door Magnetic Strip 433MHz for Security Alarm Home System" Programmed in C, using Arduino IDE.. The system is using 56mA and can be accessed using WiFi og SMS.. It is brilliant :) and at a price below 30$

I have made a GPS Tracker, alarm and surveillance system for my boat using: "LILYGO® TTGO T-Call V1.3 ESP32 Wireless Module GPRS Antenna SIM Card SIM800L Board" "GPS Module with Ceramic Antenna GPS Receiver TTL9600 for APM PIX PX4 CC3D Naze32 F3" "Geekcreit® RX500A 315/433MHz High Sensitivity Superheterodyne Wireless Receiver Module" "DIGOO DG-HOSA Wireless Remote Controller for Smart Home Security Alarm System Kits - white" "433MHZ Wireless PIR Sensor Motion Alarm Sensor Low Power LED Reminder Infrared Detector Work with Smart Home Security Alarm Hub System" "GS-WDS07 Wireless Door Magnetic Strip 433MHz for Security Alarm Home System" Programmed in C, using Arduino IDE.. The system is using 56mA and can be accessed using WiFi og SMS.. It is brilliant :) and at a price below 30$

Заказ прибыл с одним товаром, который не был запрошен. 4 позиции SKUC89370 -23104562, и 1 элемент прибыл, который не был запрошен SKU721662 -23078001.

The order arrived with one item that was not requested. 4 items are SKUC89370-23104562 and 1 item arrived that was not requested SKU721662-23078001.

Заказ прибыл с одним товаром, который не был запрошен. 4 позиции SKUC89370 -23104562, и 1 элемент прибыл, который не был запрошен SKU721662 -23078001.

Я, наконец, получил его через полтора месяца после отгрузки. Это ESP32, не имеющий существенных отличий от стандартной конструкции и спецификаций обычной схемы контактов. Чего я не понимаю, так это почему шоу, которое он загрузил, не доступно в качестве скетча. Было бы солнечно, если бы они прошли скетч с тем, который приходит загружен, чтобы проверить операцию, потому что просто, я не знаю, что он делает, и это не приносит много пользы, потому что я должен вспыхнуть снова. Кто-нибудь знает, совместима ли часть GSM с SIM800L с сетью Pepephone gprs?

Finalmente lo he recibido despues de 1 mes y medio desde el envío. Es una ESP32 sin mayores variaciones sobre el diseño estándar y con las especificaciones del pinout normal. Lo que no entiendo es porque el programa con el que viene cargado no está disponible como sketch. Sería de agardecer el que pasaran el sketch con el que viene cargado para comprobar el funcionamiento porque simplemente, no se lo que hace y tampoco sirve de mucho porque lo he de flashear de nuevo. Alguien sabe si la parte de GSM con el SIM800L es compatible con con la red de Pepephone gprs?

Я, наконец, получил его через полтора месяца после отгрузки. Это ESP32, не имеющий существенных отличий от стандартной конструкции и спецификаций обычной схемы контактов. Чего я не понимаю, так это почему шоу, которое он загрузил, не доступно в качестве скетча. Было бы солнечно, если бы они прошли скетч с тем, который приходит загружен, чтобы проверить операцию, потому что просто, я не знаю, что он делает, и это не приносит много пользы, потому что я должен вспыхнуть снова. Кто-нибудь знает, совместима ли часть GSM с SIM800L с сетью Pepephone gprs?

I have made a GPS Tracker, alarm and surveillance system for my boat using: "LILYGO® TTGO T-Call V1.3 ESP32 Wireless Module GPRS Antenna SIM Card SIM800L Board" "GPS Module with Ceramic Antenna GPS Receiver TTL9600 for APM PIX PX4 CC3D Naze32 F3" "Geekcreit® RX500A 315/433MHz High Sensitivity Superheterodyne Wireless Receiver Module" "DIGOO DG-HOSA Wireless Remote Controller for Smart Home Security Alarm System Kits - white" "433MHZ Wireless PIR Sensor Motion Alarm Sensor Low Power LED Reminder Infrared Detector Work with Smart Home Security Alarm Hub System" "GS-WDS07 Wireless Door Magnetic Strip 433MHz for Security Alarm Home System" Programmed in C, using Arduino IDE.. The system is using 56mA and can be accessed using WiFi og SMS.. It is brilliant :) and at a price below 30$

I have made a GPS Tracker, alarm and surveillance system for my boat using: "LILYGO® TTGO T-Call V1.3 ESP32 Wireless Module GPRS Antenna SIM Card SIM800L Board" "GPS Module with Ceramic Antenna GPS Receiver TTL9600 for APM PIX PX4 CC3D Naze32 F3" "Geekcreit® RX500A 315/433MHz High Sensitivity Superheterodyne Wireless Receiver Module" "DIGOO DG-HOSA Wireless Remote Controller for Smart Home Security Alarm System Kits - white" "433MHZ Wireless PIR Sensor Motion Alarm Sensor Low Power LED Reminder Infrared Detector Work with Smart Home Security Alarm Hub System" "GS-WDS07 Wireless Door Magnetic Strip 433MHz for Security Alarm Home System" Programmed in C, using Arduino IDE.. The system is using 56mA and can be accessed using WiFi og SMS.. It is brilliant :) and at a price below 30$

I have made a GPS Tracker, alarm and surveillance system for my boat using: "LILYGO® TTGO T-Call V1.3 ESP32 Wireless Module GPRS Antenna SIM Card SIM800L Board" "GPS Module with Ceramic Antenna GPS Receiver TTL9600 for APM PIX PX4 CC3D Naze32 F3" "Geekcreit® RX500A 315/433MHz High Sensitivity Superheterodyne Wireless Receiver Module" "DIGOO DG-HOSA Wireless Remote Controller for Smart Home Security Alarm System Kits - white" "433MHZ Wireless PIR Sensor Motion Alarm Sensor Low Power LED Reminder Infrared Detector Work with Smart Home Security Alarm Hub System" "GS-WDS07 Wireless Door Magnetic Strip 433MHz for Security Alarm Home System" Programmed in C, using Arduino IDE.. The system is using 56mA and can be accessed using WiFi og SMS.. It is brilliant :) and at a price below 30$

Продукт как описание. Принято OK протестировано OK питается и получено сообщение на последовательном терминале.

Product as description. Received ok tested ok powered-up and got some message on serial terminal.

Продукт как описание. Принято OK протестировано OK питается и получено сообщение на последовательном терминале.