Часть обзора переведена автоматически.
Tested, work well! Comes with Hall Sensor! But be careful, connect the Battery minus also to the frame of the Engine.
Excellent item . Connect the two wire out put to 3 volts .The ground wire is connected to the negative wire on the two wire output. The single wire output is connected to the spark plug.Finaly connect the hall sensor the three wire output. When you pass a magnet past the sensor you will get a spark!
Products delivered to you Really wonderful
replacement worked fine . Dont use 2 cell lipo. It makes the smoke come out.
Ok, this is the third CDI I’ve bought including the one that came with the blue “Hit & Miss” engine I bought last year. Hopefully this is the one that doesn’t burn up and stop working after a couple minutes of runtime. I won’t be buying another one after this, considering I’m into this engine for over $300.00 now.
I use this ignition for my own built engines.
Ware erhalten Alles bestens OK
Уважаемые продавцы Груз только что прибыл на меня, к сожалению, датчик в зале отсутствует, поэтому работа системы Это невозможно. Пожалуйста, отправьте эту часть за мной. Искренне ваш Э.Рау
Я использую их на моих домашних двигателях сборки, они очень хороши, они хорошо работают на 6 вольт и не меньше. Просто подключите датчик эффекта Холла через удлинитель сервопривода и ваш вверх и работает.
быстрая доставка, товары супер, слишком плохо, что передатчик Холла нет там