Perfeito...vem com 3 pares de pinos diferentes. Muito bom.

Perfeito...vem com 3 pares de pinos diferentes. Muito bom.

Perfeito...vem com 3 pares de pinos diferentes. Muito bom.

I was able to get this to work with my Wemos D1 minis *after* I added a pull-down resistor (1k or 2.2k or 10k, etc) to D8 (GPIO15/SS). If you don't do this, then the D1 mini won't boot. https://wiki.wemos.cc/products:d1:d1_mini But the fix is simple -- just solder a pull-down resistor between D8 and Gnd. I've included a picture of one of the boards I modified (the soldering job is really a hack -- it was just a proof-of-concept; I'm probably going to try to use a surface mount resistor in the end).

I was able to get this to work with my Wemos D1 minis *after* I added a pull-down resistor (1k or 2.2k or 10k, etc) to D8 (GPIO15/SS). If you don't do this, then the D1 mini won't boot. https://wiki.wemos.cc/products:d1:d1_mini But the fix is simple -- just solder a pull-down resistor between D8 and Gnd. I've included a picture of one of the boards I modified (the soldering job is really a hack -- it was just a proof-of-concept; I'm probably going to try to use a surface mount resistor in the end).

I was able to get this to work with my Wemos D1 minis *after* I added a pull-down resistor (1k or 2.2k or 10k, etc) to D8 (GPIO15/SS). If you don't do this, then the D1 mini won't boot. https://wiki.wemos.cc/products:d1:d1_mini But the fix is simple -- just solder a pull-down resistor between D8 and Gnd. I've included a picture of one of the boards I modified (the soldering job is really a hack -- it was just a proof-of-concept; I'm probably going to try to use a surface mount resistor in the end).

Приятное дополнение к моему D1 mini

Nice addition to my D1 mini

Приятное дополнение к моему D1 mini

antistatic package. looks good.

antistatic package. looks good.

antistatic package. looks good.

Пункт, как описано.

Item as described.

Пункт, как описано.

маленькая вещь, но работает нормально

a little thing but works ok

маленькая вещь, но работает нормально

This d1 mini shield was the last one I needed to complete the kit I put together. As with all the other ones I had previously purchased,I soldered it up and it worked like I new it would. 👍

This d1 mini shield was the last one I needed to complete the kit I put together. As with all the other ones I had previously purchased,I soldered it up and it worked like I new it would. 👍

This d1 mini shield was the last one I needed to complete the kit I put together. As with all the other ones I had previously purchased,I soldered it up and it worked like I new it would. 👍

thx

thx

thx

Well packaged and excellent delivery time (9 calendar days from order). A Micro SD card is a great way of adding a data logging capability to any MCU project. I am happy to recommend these items.

Well packaged and excellent delivery time (9 calendar days from order). A Micro SD card is a great way of adding a data logging capability to any MCU project. I am happy to recommend these items.

Well packaged and excellent delivery time (9 calendar days from order). A Micro SD card is a great way of adding a data logging capability to any MCU project. I am happy to recommend these items.

еще не использовали, но выглядит неплохо. Информация отсутствует.

haven't used yet, but looks good. No information included.

еще не использовали, но выглядит неплохо. Информация отсутствует.