I was actually surprised at the quality of this display! I connected it to my Raspberry PI 3 B+, and connections and setup were pretty straightforward. It was even able to display video files without issue! Received fairly quickly, and packaging was excellent. I appreciated the small plastic case it was packaged in for protection.

I was actually surprised at the quality of this display! I connected it to my Raspberry PI 3 B+, and connections and setup were pretty straightforward. It was even able to display video files without issue! Received fairly quickly, and packaging was excellent. I appreciated the small plastic case it was packaged in for protection.

I was actually surprised at the quality of this display! I connected it to my Raspberry PI 3 B+, and connections and setup were pretty straightforward. It was even able to display video files without issue! Received fairly quickly, and packaging was excellent. I appreciated the small plastic case it was packaged in for protection.

Cute little 80x160 display. It does indeed have a ST7735S chip on it which supports vertical scrolling (long side is the vertical). Connecting the BLK pin to GND turns the backlight off. The display draws approximately 19 mA while on, 360 uA with the chip in sleep state and the backlight off, and 1.6 mA with the chip working and the backlight off. Mine is wired for CASET(25, 105) and RASET(1, 160). Also, colors are inverted and channel order is BGR, so turning display inversion on and setting RGB to 1 with MADCTL is necessary if it is fed with regular RGB data. Besides the display, the package included straight pins, right-angle pins, and a little box.

Cute little 80x160 display. It does indeed have a ST7735S chip on it which supports vertical scrolling (long side is the vertical). Connecting the BLK pin to GND turns the backlight off. The display draws approximately 19 mA while on, 360 uA with the chip in sleep state and the backlight off, and 1.6 mA with the chip working and the backlight off. Mine is wired for CASET(25, 105) and RASET(1, 160). Also, colors are inverted and channel order is BGR, so turning display inversion on and setting RGB to 1 with MADCTL is necessary if it is fed with regular RGB data. Besides the display, the package included straight pins, right-angle pins, and a little box.

Cute little 80x160 display. It does indeed have a ST7735S chip on it which supports vertical scrolling (long side is the vertical). Connecting the BLK pin to GND turns the backlight off. The display draws approximately 19 mA while on, 360 uA with the chip in sleep state and the backlight off, and 1.6 mA with the chip working and the backlight off. Mine is wired for CASET(25, 105) and RASET(1, 160). Also, colors are inverted and channel order is BGR, so turning display inversion on and setting RGB to 1 with MADCTL is necessary if it is fed with regular RGB data. Besides the display, the package included straight pins, right-angle pins, and a little box.

Aggódtam, hogy hogy fog egyben ideárni, de egy masszív kis műanyag dobozba van csomagolva, így sérülésmentesen megérkezett.

Aggódtam, hogy hogy fog egyben ideárni, de egy masszív kis műanyag dobozba van csomagolva, így sérülésmentesen megérkezett.

Aggódtam, hogy hogy fog egyben ideárni, de egy masszív kis műanyag dobozba van csomagolva, így sérülésmentesen megérkezett.

Use GraphicsTest.ino Ucglib library , uncomment Ucglib_St7735_18x128x160_swspii ucg ..ect and in the void loop remove the switch(r&3) loop since it will rotate the animation around

Use GraphicsTest.ino Ucglib library , uncomment Ucglib_St7735_18x128x160_swspii ucg ..ect and in the void loop remove the switch(r&3) loop since it will rotate the animation around

Use GraphicsTest.ino Ucglib library , uncomment Ucglib_St7735_18x128x160_swspii ucg ..ect and in the void loop remove the switch(r&3) loop since it will rotate the animation around

Изначально я пытался заставить экран работать, но мне удалось заставить его работать на NodeMCU ESP8622. Наклейки не совпадают со многими документами, которые я мог найти, так что принял обоснованное предположение в конце концов, чтобы оно работало в соответствии с документацией Adafruit ST7735, которую я нашел. На других устройствах SCL помечен как CLK, SDA помечен как DIN. Остальные немного отличаются, но ясно предположить (например, DC = D/C) Синий и красный цвета отличаются от библиотеки Адафрута, очевидно, вы можете изменить это поведение, но пока я не пытался - просто жить с этим. Достойный экран по цене! Используется в цифровом датчике температуры (DS18B20), который отслеживает высокую и низкую температуру и время регистрации температуры. (время, полученное от сервера NTP).

I struggled to get the screen working initially, however I've managed to get it working on a NodeMCU ESP8622. The pin labels don't match a lot of the documentation I could find so took an educated guess in the end and have it working inline with the Adafruit ST7735 documentation I've found. On other devices SCL is labeled CLK, SDA is labeled DIN. The rest vary a little but are clear to guess (DC = D/C for example) Blue and Red colour inputs are different from the Adafruit library, apparently, you can change this behaviour but so far I've not tried - just living with it. Decent screen for the price! In use for a digital temperature probe (DS18B20) that tracks high and low temperature and the time at which the temperatures are recorded. (time picked up from an NTP server).

Изначально я пытался заставить экран работать, но мне удалось заставить его работать на NodeMCU ESP8622. Наклейки не совпадают со многими документами, которые я мог найти, так что принял обоснованное предположение в конце концов, чтобы оно работало в соответствии с документацией Adafruit ST7735, которую я нашел. На других устройствах SCL помечен как CLK, SDA помечен как DIN. Остальные немного отличаются, но ясно предположить (например, DC = D/C) Синий и красный цвета отличаются от библиотеки Адафрута, очевидно, вы можете изменить это поведение, но пока я не пытался - просто жить с этим. Достойный экран по цене! Используется в цифровом датчике температуры (DS18B20), который отслеживает высокую и низкую температуру и время регистрации температуры. (время, полученное от сервера NTP).

Fonctionne très bien.

Fonctionne très bien.

Fonctionne très bien.

It looks promising and capable... 80x160 IPS display for your DIY projects.

It looks promising and capable... 80x160 IPS display for your DIY projects.

It looks promising and capable... 80x160 IPS display for your DIY projects.

Looks great. Very nice size for the purpose I want to use it for.

Looks great. Very nice size for the purpose I want to use it for.

Looks great. Very nice size for the purpose I want to use it for.

voor the ironman helmet hologram

voor the ironman helmet hologram

voor the ironman helmet hologram

excelente

excelente

excelente