Отзывы покупателей

4.96 из 5
Написать отзыв
  • Все отзывы (57)
  • Образ (12)
  • Видео (0)
  • Все звезды
    • Все звезды(57)
    • 5 Звезда(55)
    • 4 Звезда(2)
    • 3 Звезда(0)
    • 2 Звезда(0)
    • 1 Звезда(0)
Сортировать по:
  • оценке
  • полезности
  • дате
Отзывы только из вашей страны (Armenia)
  • February-11 2020 06:29:59

    Hello friends, it's me again, Thom the watchmaker. I am a professional solder, SMD components are no problem for me. Here are some pictures of my finished soldered watch. Front and back. Please see for yourself - the clock is very clean and soldered without any short circuits. Checked all connections according to the schematic. Nevertheless my watch does not work. After switching it on, not a single LED lights up. The clock is dead, nothing works. The STC-Cip gets very hot. Unfortunately I can't

    Комментарии (3)
  • February-09 2020 18:06:45

    The circuit board is well made and there are even spare components in case you sneeze and lose one forever. Yes, the components are tiny. Unfortunately after building the kit and checking all my soldering twice, it still doesn't work. I've only just found the schematic diagram in the documentation file, so I'll be troubleshooting.

    Комментарии (3)
  • February-17 2020 10:17:45

    Hi, This is second kit, firs one microconroler STC wrongly soldered, this one finally works!! Some tips: - to open instruction: right click on link, then Save Link As, then open downloded file with WINRAR - solder microcontroler STC like in picture attached, with STC sign rotated right by 90 degrees - vibration switch was very sensitive, I was not able to setup clock due to continouos resetting of clock. To solve I strap-it vibration switch. - Capacitors code: C1-C2, BC1-BC2 20pf SMD white color,

  • May-03 2020 18:26:59

    second build was the charm.....works great.....there is no R6-1, position the cpu chip correctly , Take your time soldering the SMDs, I solder the the rgb leds last, in increments of two and test them out as I put them in. good luck

    Комментарии (1)
  • October-16 2020 05:00:48

    The parcel was well packed and arrived relatively quickly. I am very sorry, but I was wrong. I did not notice (and think) that I should solder SMD components. So I will not begin to build this clock until I have enough practice in SMD soldering.

  • May-18 2020 06:50:15

    Nice, hard, project. My SMD skils have increased. The clock works, except voor the IR remote. I have tested the sensor and the remote, see pictures. Further checked continuity to the HW (P3.5/11) on the STC5A chip.

  • February-16 2020 10:17:19

    Hi.. The clock is excellent. I'm not a soldering professional but I managed to put together a watch. The instructions are incomplete.

    Комментарии (1)
  • February-19 2020 03:28:12

    This item was packed well. The only thing which is missing the schematic and the component list. Later I have found on the website. it will be fine to include. It looks good and even if it is not mounted yet together.

  • December-04 2020 08:11:13

    bezpieczna transakcja dobry kontakt ze sprzedawcą towar zgodny z opisem fachowo wykonany Serdecznie polecam

  • February-26 2020 13:31:56

    Leuke diy kit, werkt zoals verwacht.

    Комментарии (1)

    Total 0 pages

    Go to page



    recommendation for you
    • US$39.99
    • US$17.38
    • US$4.99
    • US$2.99
    • US$8.99
    • US$24.99
    • US$89.99
    • US$14.99
    • US$8.99
    • US$2.99
    • US$9.99
    • US$14.99
    • US$6.99
    • US$37.99
    • US$3.99
    • US$11.99
    • US$8.99
    • US$11.99