Отзывы покупателей

4.85 из 5
Написать отзыв
  • Все отзывы (40)
  • Образ (4)
  • Видео (0)
  • Все звезды
    • Все звезды(40)
    • 5 Звезда(37)
    • 4 Звезда(2)
    • 3 Звезда(0)
    • 2 Звезда(0)
    • 1 Звезда(1)
Сортировать по:
оценке
  • оценке
  • полезности
  • дате
  • January-21 2017 17:14:37

    The board arrived in a simple envelope without any of the advertised pins. Flashing it is a bit tricky because of the increased memory but howto is available on instructables. The quality of the soldering at the antenna connector is much better than on the pictures above (but a resistor change is probably needed to use it). The board has the same size and pinout as the D1 Mini but the reset button and the USB connector are soldered on the other side. There are no parts on the bottom layer. Mine has

    Комментарии (2)
  • February-19 2017 13:32:42

    I'm using the Arduino IDE to program this board. I'm fairly familiar with Arduino clones, so I figured I would try this one out as my first endeavor into the ESP8266 world. Please don't let me dissuade you from trying out this board, but be aware that if you plan on using the Arduino IDE, this board is a bit too new for easy integration. The D1 and the non-Pro D1 mini are a bit easier. The ESP8266 project has not folded in the changes to support this board yet, but I found a fork of the project

    Комментарии
  • May-20 2017 01:59:34

    I received 2 parts packed in antistatic bags. I plugged them on the USB port and they were recognized immedialty as serial ports without any action to install drivers on W10. They replace Wemos D1 mini modules with which they are 100% compatible so no code change is needed. To improve WiFi range they are equiped with an external antenna (3DBI Brass 2.4G Receiver Antenna Omnidirectional from Banggood). I expect a stable communication at over 150m outdoor.

    Комментарии
  • Jimi
    AU
    January-20 2018 10:56:40

    Item as described Works well. Good seller.

    Комментарии
  • November-16 2017 17:08:13

    He comprado la Wemos D1 Mini Pro para hacer una estación meteorológica y no puedo estar mas satisfecho con ella. Le he acoplado una antena externa y para eso he tenido que desoldar, girar y volver a soldar el puente de 0 ohmios que tiene y se nota, coge el doble de redes. En este vídeo explican como hay que hacerlo: https://youtu.be/3lHoG1mu7hY Se programa con el IDE Arduino, eso si, hay que configurar el IDE antes de usarla para tener compatibilidad con la placa. Además existe un Bug que no

    Комментарии (1)
  • EdVIP4
    US
    February-08 2017 14:55:24

    I have several of these, they are GREAT!!!!! I picked this up as I have several antennas and was hoping ot make this one longer range. Very nice IOT controller, I will buy more.

    Комментарии
  • August-18 2017 03:51:30

    Good module,enough GPIOs for different purposes. Adivse: purchase with antenna, at leas a cheap one like Soft Flexible FPC Welding Antenna. The module itself does not have antenna on the board, so for example, under my table (on the top of my PC) the module failed to catch WiFi.

    Комментарии (1)
  • February-03 2017 08:54:32

    It arrived fairly quickly but the pins that are on the images and on the actual description were not included. The other parts are as described.

    Комментарии
  • February-03 2017 02:06:04

    Board is Ok, but! 1 x WeMos D1 mini Pro - yes 2 x Long female pins - NO!!! 2 x Short female pins - NO!!! 2 x Normal pins - NO!!!

    Комментарии
  • August-09 2018 17:13:15

    Have yet to build and plugin but delivery was faster than expected in fact it arrived first among a number of orders.

    Комментарии
Show:

    Go to page

    Go

    Рекомендуем

    recommendation for you
    • US$1.99
    • US$30.28
    • US$2.99
    • US$12.99
    • US$14.99
    • US$9.99
    • US$5.99
    • US$9.99
    • US$2.49
    • US$18.53
    • US$8.99
    • US$11.99
    • US$12.99
    • US$134.99
    • US$5.99
    • US$5.99
    • US$8.99
    • US$4.99