Отзывы покупателей

4.8 из 5
Написать отзыв
  • Все отзывы (609)
  • Образ (73)
  • Видео (7)
  • Все звезды
    • Все звезды(609)
    • 5 Звезда(539)
    • 4 Звезда(42)
    • 3 Звезда(12)
    • 2 Звезда(7)
    • 1 Звезда(9)
Сортировать по:
  • оценке
  • полезности
  • дате
Отзывы только из вашей страны (Armenia)
  • March-16 2020 00:21:51

    thats very good 3d printer. Easy setup and I got high quality prints. Just look at photos.

    Комментарии (2)
  • December-02 2020 07:57:29

    fast delivery great printer only manual could be better

  • September-18 2017 02:19:53

    This my third CR10 printer. The first I bought print for now more than thousand hours and work very well. The assembly is really quick and easy and just after a quick tuning you can begin to print as many things you want. The big volume allow you to print big pieces or to print lots of pieces at the same time. I receive mine with a broken Z coupler but Banggood send me a new one. So I'm pleased about the after sale service. 3Dprint is my job for more thant 4 years now. I tried a lot of different printers,

    Комментарии (1)
  • November-06 2017 14:28:28

    Ordered this after reading the many reviews about this. once arrived I opened up and set to building after finding some bent brackets and loose bolts I set about making sure everything was true and straight. tried to preheat the bed to set the levelling but the bed wouldn't heat (opened the control box to find the +&- the wrong way round on the power supply) now working I found the glass bed wasn't flat used a mirror time and now it prints great. Great printer but needs setting up

  • July-04 2017 09:34:59

    Great 3D printer. I can't compare this to other printers because this is my first one. The printer comes 90% assembled as in description 10% remaining assembly is really easy, even a child can do that. Packaging was really good I did not encounter any issues. I removed the orange stripes because I like the full black metal look of the printer. Shipment was really fast, also banggood team was really helpful they did everything that I asked them flawlessly. The printer is currently printing and from

  • December-03 2019 06:12:01

    The printer totally fulfilled my expectations. The quality of the printed parts are pretty impressive even though I exposed the PLA to moisture for a long time. Besides that, I got it in two weeks (way earlier than I expected) and it was very well packaged with sturdy foam. The assembly was for the most part super easy and it is also gratifying to know that there's such a big community in Internet (specially in FB) which you can rely on when in doubt.

  • June-15 2018 13:16:40

    Premetto che è la mia prima stampante 3d , ma è veramente uno spettacolo , intuitiva , facile da usare anche per un neofita , stampa che è una meraviglia , vale tutto quello che costa , veramente ben spesi poi con i vari upgrade acquistabili anche un po alla volta diventa uguale alla cr -10s. FANTASTICA

    Комментарии (1)
  • August-01 2017 07:27:21

    This 3d printer rocks! Not only is the build size phenomenal but its easy to assemble and setup and you will be printing withing an hour of opening the box! The community on Facebook is huge, helpful and exciting - check it out. I've printed some mods for it, installed LED lighting and changed the glass for an IKEA mirror and use a stick of glue for the print adhesion. And and and shipping to AU was like a week! You wont regret this purchase!

  • July-28 2017 20:42:33

    Received my shipment yesterday afternoon. About 7 calendar days. This is my first 3D printer ever and I took my time building it. There wasn't much to install but there were some issues like the z-axis limit switch's metal flap was bent, I had to bend it backwards but a replacement switch was given in the spare parts baggie. When I was screwing the frame together, the holes weren't cleaned out after the drilling so I had to remove a strip of metal filing. I used grease and it made it easier to screw

  • July-26 2017 05:59:35

    Had this printer for a little under a week, and I have already managed to print out some high quality products with very little clean up at the end. I have attached some of my prints, finished and all so you can see the detail. Please note, some prints I have done at a 0.3mm layer height therefore are low quality....but still look good to me.


    Total 0 pages

    Go to page



    recommendation for you
    • US$196.00
    • US$539.00
    • US$14.99
    • US$9.99
    • US$14.99
    • US$19.99
    • US$8.99
    • US$6.36
    • US$41.99
    • US$16.39
    • US$259.00
    • US$2.57
    • US$299.00
    • US$399.00
    • US$21.48
    • US$23.99
    • US$12.90
    • US$179.99