Продукт выглядит неплохо. Штифты не паяны (см. прилагаемые фотографии). Мой пришел с не так хорошо упакованы - доска была помещена прямо в пластиковый почтовый конверт без пробки или любого другого защитного материала (к счастью, моя оказалась неповрежденной). Питание от DS1117-3.3 стабилизатор мощности, так что теоретически он может принимать напряжение до 12В постоянного тока, но чтобы быть в безопасности, я собираюсь использовать 5-9В постоянного тока. Необходимо использовать центровый положительный адаптер. Сам FPGA использует напряжение 3,3 В, если вы решили использовать разъем. Обратите внимание, что Cyclone II - относительно старое семейство микросхем, поэтому вам нужно использовать немного более старую версию программного обеспечения Altera. В целом это хорошая доска для домашнего проекта по разумной цене. Упаковка может быть лучше.

The product looks nice. The pins are not soldered (see attached photos). Mine came with not so good packaged - the board was put directly inside the plastic postal envelope without aircap or any other protecting material (luckily mine came undamaged). It's powered via DS1117-3.3 power regulator so in theory it can accept up to 12V DC voltage but to stay safe I'm going to use 5-9V DC. Center positive adapter need to be used. The FPGA itself uses 3.3 V Vcc if you decide to use connector. Note that Cyclone II is relatively old chip family so you need to use a bit older version of the Altera software. Overall it's a good board for home project at a reasonable price. Packaging could be better.

Продукт выглядит неплохо. Штифты не паяны (см. прилагаемые фотографии). Мой пришел с не так хорошо упакованы - доска была помещена прямо в пластиковый почтовый конверт без пробки или любого другого защитного материала (к счастью, моя оказалась неповрежденной). Питание от DS1117-3.3 стабилизатор мощности, так что теоретически он может принимать напряжение до 12В постоянного тока, но чтобы быть в безопасности, я собираюсь использовать 5-9В постоянного тока. Необходимо использовать центровый положительный адаптер. Сам FPGA использует напряжение 3,3 В, если вы решили использовать разъем. Обратите внимание, что Cyclone II - относительно старое семейство микросхем, поэтому вам нужно использовать немного более старую версию программного обеспечения Altera. В целом это хорошая доска для домашнего проекта по разумной цене. Упаковка может быть лучше.

i ordered this product with others (order number 76355107) but the banggood staff (Phoebe Li) is refusing to send to my city in australia. at first i thought it was an accident and i tied to help help her, but she keeps refusing to send to my city. it had been over a week with many emails and she still not sending. i believe she is scamming me. her email is "order@banggood.com". also i cannot contact any other banggood staff even when i request another person. i believe Banggood is a scam and i am now reporting to all.

i ordered this product with others (order number 76355107) but the banggood staff (Phoebe Li) is refusing to send to my city in australia. at first i thought it was an accident and i tied to help help her, but she keeps refusing to send to my city. it had been over a week with many emails and she still not sending. i believe she is scamming me. her email is "order@banggood.com". also i cannot contact any other banggood staff even when i request another person. i believe Banggood is a scam and i am now reporting to all.

i ordered this product with others (order number 76355107) but the banggood staff (Phoebe Li) is refusing to send to my city in australia. at first i thought it was an accident and i tied to help help her, but she keeps refusing to send to my city. it had been over a week with many emails and she still not sending. i believe she is scamming me. her email is "order@banggood.com". also i cannot contact any other banggood staff even when i request another person. i believe Banggood is a scam and i am now reporting to all.

bueno para las prácticas

bueno para las prácticas

bueno para las prácticas

The FPGA is amazing but the JTAG port doesn't load the design, even with the correct driver and everything in the setup double checked. But the other, AS, works fine after changing the parameters in quartus ii. The board itself is kinda sticky and has the finger print of the people who assembled it. Even though, I'm satisfied with the product.

The FPGA is amazing but the JTAG port doesn't load the design, even with the correct driver and everything in the setup double checked. But the other, AS, works fine after changing the parameters in quartus ii. The board itself is kinda sticky and has the finger print of the people who assembled it. Even though, I'm satisfied with the product.

The FPGA is amazing but the JTAG port doesn't load the design, even with the correct driver and everything in the setup double checked. But the other, AS, works fine after changing the parameters in quartus ii. The board itself is kinda sticky and has the finger print of the people who assembled it. Even though, I'm satisfied with the product.

Amazing ALTERA FPGA for beginners at an amazing price. Timely delivery as expected. Banggood is better than all online shopping sites and apps for its great quality, good price, variety and depth of its product offerings and timely delivery. I have never had any product returns. Online payment is safe and secure, their mobile app is easy to browse and very informative, with a great customer loyalty reward program and helpful after sales support over voice, chat and email. Packing is appropriate and product quality is as described on their app.

Amazing ALTERA FPGA for beginners at an amazing price. Timely delivery as expected. Banggood is better than all online shopping sites and apps for its great quality, good price, variety and depth of its product offerings and timely delivery. I have never had any product returns. Online payment is safe and secure, their mobile app is easy to browse and very informative, with a great customer loyalty reward program and helpful after sales support over voice, chat and email. Packing is appropriate and product quality is as described on their app.

Amazing ALTERA FPGA for beginners at an amazing price. Timely delivery as expected. Banggood is better than all online shopping sites and apps for its great quality, good price, variety and depth of its product offerings and timely delivery. I have never had any product returns. Online payment is safe and secure, their mobile app is easy to browse and very informative, with a great customer loyalty reward program and helpful after sales support over voice, chat and email. Packing is appropriate and product quality is as described on their app.

неизвестно, FPGA все еще новая тема для меня

unknown, FPGA is still a new topic to me

неизвестно, FPGA все еще новая тема для меня

Excellent price for an FPGA development board! The board I received was slightly greasy from a tiny bit of remaining flux but the design and solder joints look good and for the price I really cannot complain. You need to buy a USB blaster or a similar device to program it. For the software you will need to install Quartus; I believe this board is supported up to version 13.0 SP1. The I/O pins use 3.3v logic levels, pay attention that not all pins can swap between being an input or an output! Check the datasheet. If you want to solder wires to the board to supply the +5v you can use "P8" next to the DC barrel jack; the pad near the edge is ground, the one closest to the barrel jack is 5v. Have fun!

Excellent price for an FPGA development board! The board I received was slightly greasy from a tiny bit of remaining flux but the design and solder joints look good and for the price I really cannot complain. You need to buy a USB blaster or a similar device to program it. For the software you will need to install Quartus; I believe this board is supported up to version 13.0 SP1. The I/O pins use 3.3v logic levels, pay attention that not all pins can swap between being an input or an output! Check the datasheet. If you want to solder wires to the board to supply the +5v you can use "P8" next to the DC barrel jack; the pad near the edge is ground, the one closest to the barrel jack is 5v. Have fun!

Excellent price for an FPGA development board! The board I received was slightly greasy from a tiny bit of remaining flux but the design and solder joints look good and for the price I really cannot complain. You need to buy a USB blaster or a similar device to program it. For the software you will need to install Quartus; I believe this board is supported up to version 13.0 SP1. The I/O pins use 3.3v logic levels, pay attention that not all pins can swap between being an input or an output! Check the datasheet. If you want to solder wires to the board to supply the +5v you can use "P8" next to the DC barrel jack; the pad near the edge is ground, the one closest to the barrel jack is 5v. Have fun!

Perfect kit for the beginners, thank you for qualified package and such a good product.

Perfect kit for the beginners, thank you for qualified package and such a good product.

Perfect kit for the beginners, thank you for qualified package and such a good product.

Я очень счастлива.

Jsem spokojený velmi dobře

Я очень счастлива.

FPGA не пострадали. Продукт потрясающий. Штифты не паяны. Вам потребуется установить старую версию Quartus (13.0 SP1).

The FPGA came undamaged. The product is amazing. The pins are not soldered. you will need to install an old version of Quartus (13.0 SP1).

FPGA не пострадали. Продукт потрясающий. Штифты не паяны. Вам потребуется установить старую версию Quartus (13.0 SP1).