Доставить в United Kingdom , USD
Все категории

Отзывы покупателей

4.89 из 5
Написать отзыв
  • Все отзывы (108)
  • Образ (11)
  • Видео (0)
  • Все звезды
    • Все звезды(108)
    • 5 Звезда(101)
    • 4 Звезда(4)
    • 3 Звезда(2)
    • 2 Звезда(0)
    • 1 Звезда(1)
Сортировать по:
оценке
  • оценке
  • полезности
  • дате
    • Общая:
    • Цена:
    • Качество:
    • Внешность:
    Works...

    2019-03-11 20:21:07

    I used a DIY Laser Power Meter to do a quick test upon receipt of the Laser. A quick measurement showed 4200mW (4.2 Watts at the meter) output based on the calibration of the Meter I built and calibrated. With further testing it may output a higher value reading. The power output was set by an Eleksmaker Mana SE board and Eleksmaker Evolution Desktop CAM 3.1. It took a long time to get this to the USA. ( 1 month )

    Комментарии (1)
  • tim
    • Общая:
    • Цена:
    • Качество:
    • Внешность:

    2019-04-16 16:56:46

    I am very pleased with this laser. I have mounted it to a MPCNC machine and I have so far engraved photographs on plywood and cut out some intricate parts from 2mm grayboard. It easily cut through 3mm plywood (3 / 4 passes) which is the furthest I've pushed it so far.

    Комментарии
    • Общая:
    • Цена:
    • Качество:
    • Внешность:

    2019-06-23 12:55:21

    Super produit

    Комментарии
    • Общая:
    • Цена:
    • Качество:
    • Внешность:

    2019-05-25 14:19:50

    Tolles Gerät, Funktioniert super mit Eleksmaker A3 Pro.

    Комментарии
    • Общая:
    • Цена:
    • Качество:
    • Внешность:

    2019-04-12 00:29:16

    Well made and it works! Hooked it up with grbl running on Arduino Uno using PWM to this laser from pin D11. Used UGS to send G-Code to grbl. I mounted this on my Sherline CNC mill with a 3D printed mounting bracket. I used Vectric to create the artwork - and made the Z axis moves to zero so only the x, y moves with the profile cut on the line.

    Комментарии
    • Общая:
    • Цена:
    • Качество:
    • Внешность:
    Laser ingrave 5 W

    2019-01-15 10:32:02

    Ótimo produto bem compacto e com boa potência, chegou tudo certo sem problemas, recomendo. Ideal para meu projeto na impressora 3D.

    Комментарии
    • Общая:
    • Цена:
    • Качество:
    • Внешность:
    works well

    2018-10-12 10:26:02

    I have this rigged up to a thrown together cnc machine with 4 steppers and 4 tb6600 stepper drivers hooked up to an arduino mega running with grbl and now with this 5W laser engraving module. I wish there were instructions or google searches with people who did this more but there are not. so here's some tips. I found if I put the dangly cable where the power is coming in from connected to the ground on the arduino and the + on the ttl/pwn thing on the right part it works, after doing the $32 enable

    Комментарии (1)
    • Общая:
    • Цена:
    • Качество:
    • Внешность:
    Works as expected

    2018-07-26 09:47:53

    I've bought this for my MPCNC engraver. I use it for cutting 3mm plywood and etching foamboard. Unfortunately, it can not cut foamboard without burning foam inside a sheet. I have no possibility to measure power, but it's definitely more powerful than 2,5W laser, which I bought earlier. And having a controller module is a huge advantage, it can be connected directly to an Arduino's PWM output.

    Комментарии (1)
  1 2 3 4 5 6 7 8 9 10 ... 14  

Рекомендуем

Онлайн-консультант
Опрос удовлетворенности

Скачать приложение, чтобы получить эксклюзивный 10% off купон