Доставить в United Kingdom , USD
Самый положительный отзыв о %s на Banggood, Покупайте лучший %s по самой низкой цене на Banggood. Просмотрите самый полезный положительный отзыв о %s перед покупкой., радиоуправляемые игрушки, забавные виды спорта, фэшн, популярная электроника
psychotik2k3 11/07/2020
tested quickly on an AA battery, it worked. in reality the device send the current every 1.5 seconds with a beep, so it does not detect if you have contact or not (i have the mini usb version). but for the price it's cool. only 2 drawbacks are on the solder pins: it seems they are not removable and they are not isolated on a long distance, the distance where you hold it with your fingers... i'm not sure what happens if your fingers are wet... i isolate them with some thermalshrink tubes for safety.
25
Комментарии (10)
Оплатить
  • somekindofdevil You don't need to isolate pins. Output voltage is just 4.2 volts. So, you wouldn't even feel anything if you lick them.

    Ответить 17/08/2020
  • mirceac @somekindofdevil ??? Why don't you lick them...I would like to be there seeing you!

    Ответить 03/09/2020
  • GaryQT you don't need high voltage for spot welding just high current

    Ответить 04/10/2020
  • menvert Yep as stated the low voltage means it wont penetrate the skins resistance.
    But I would think it WILL give you quite a kick on your tongue as it's much more conductive/less resistive, probably not deadly though as it wont be crossing your heart

    Ответить 07/10/2020
  • Volker Electrically nothing can harm the operator, since 4.2V cannot drive a dangerous current through operator's body. The only accident which could happen is damaging the device by short circuiting and injure the operator by fire. Therefore no extra insulation is necessary, but it is recommended to wear protection gloves.

    Ответить 15/10/2020
  • ResSet High current at such a low voltage will not do much harm. But if there is damage to the skin, it can be unpleasant

    Ответить 10/01/2021
  • nullvoxel itdoes have an auto-detect mode. You enable it by first turning on the device and then single pressing the button.

    Ответить 10/02/2021
  • BG171117164 @menvert You are so wrong there. You would have to be in the mid to low micro volt range for the skin's natural resistance to block voltage. But with the current this thing works with touching it with your hands will give you a small but nasty 3 degree burn, more so if you are stupid enough to stick you tung on it when it's turned on.

    Ответить 11/03/2021
  • BG513421110 @BG171117164 42 V ist die untere Grenze für gefährliche Spannung! Bis 24V ist die Spannung ungefährlich. Wichtig ist die Energie die sich im Körper entladen kann z.B.: Bei 220V sind 30mA = 0,03A die ein gesunder Mensch kurz verkraftet, ohne Schäden!
    Deswegen reagieren die FI- Sicherungen ab 30mA. Auch 1000A bei 4,2V ist in dem Fall völlig unbedenklich!

    Ответить 31/03/2021
  • BG221554131 @somekindofdevil mine doesn't have lights to tell you if its even charging

    Ответить 12/04/2021
Онлайн-консультант
Опрос удовлетворенности

Скачать приложение, чтобы получить эксклюзивный 10% off купон