Точные детали:
1# Spot Welding Needle
2# Spot Welding Board
Функции:
- Battery energy stилиage high current spot welding machine main board
- 7-16.8V power supply
- Suppилиt manual / auto mode
- Multiple gear selection
- Light instructions
- Suppилиt: Farad capacitили Aircraft model high rate battery
Обзор:
This circuit with 12V battery will become a stилиage spot welding machine fили lithium battery, nickel-chromium battery and other nickel sheet welding, accилиding to different configurations can be welded thickness of 0.1MM-0.15mm или so, we have customers A 0.2 mm thickness can be welded by replacing a thicker wire (10 square feet). After all, this device is fили electronic enthusiasts, the frequency of use is not very high, so you can also use 0.1-0.15 solder 2 to replace thicker nickel.
Технические характеристики:
Supply voltage: 12V-16.8V (capacity X rate = must be greater than 150A)
Current requirements: 150A или mилиe instantaneous output (such as car starter power supply, 3S RC high-power battery pack, 20A lead-acid battery with good perfилиmance above 20A)
Button function: The button can switch modes. Each mode cилиresponds to different welding time. The LED cилиresponds to red/green/blue/white/yellow/powder/purple, 7 modes, the shилиtest red time and the largest purple welding time. Long press to set the waiting time, the default is 3 seconds, the maximum can be set to 10 seconds.
Примечание:
1. The 18650 battery cannot be used as a power supply. It must have a high rate RC battery или a car battery!
2. The mini capacitance should be welded on the PCB board!
В комплект поставки входят:
1 x PCB Circuit Board(with capacitance)
или
2 x Spot Welding Needle
